EZpiet Sky Scout Laser-cut Kit

From: $79.00

A complete precision laser-cut kit for our EZpiet™ Sky Scout sport scale RC model aircraft. This kit includes all necessary hardware, strip wood stock, plans, and construction article to assemble the EZpiet Sky Scout airframe. Designed and laser-cut by Stevens AeroModel for balsabuilder, the core airframe components feature tab and notch construction to simplify the build process.

Published 2017: Issue 5 of balsabuilder Magazine – designed and manufactured by Stevens AeroModel.

Made in Colorado, USA
Item Number: BBM-FK013
Wing span 31.5 in. | Wing area 190 sq. in. | Flying Weight 7.5 oz. | 3-Channel RET
 View Construction Article

Add the graphics!

Add these snazzy CNC cut vinyl graphics to complete the styling of your EZpiet!

Add the motor!

The EZpiet was designed for our SA Sport Park 250 brushless motor.

Only 1 left in stock

Add the electronic speed control!

Simplify your shopping and save! Our Sport 10A speed control is pre-wired to be plug-and-play compatible with the Park 250 motor and suggested battery pack.

Out of stock

Add the propeller!

This GWS 6x3 propeller is a perfect match to our Park 250 motor. Now is a good time to grab a pair and a spare!

In stock

Add the prop adapter!

This prop adapter is perfectly matched to the 6x3 GWS propeller – no drilling of the prop hub required!

Out of stock

Include two HS-40 servos! × 2

The Hitec HS-40 servo is an affordable high-quality servo that you can depend on. Two are required for this model.

In stock

Add the battery!

The Hyperion 550mAh 7.4V LiPo is our pack of choice for the EZpiet when using our suggested power system.

In stock

Additional Details

This is a novice level sport scale kit that requires basic modeling skills to assemble.

Kit Includes

  • Plans, full-size computer drafted including parts templates
  • Laser-cut balsa parts (all formers and ribs are precisely laser-cut)
  • Balsa Strip Wood
  • Hardware (push-rods, control horns, fittings, etc…)

Required Electronics

  • Servos, two Hitec HS-35 or HS-40
  • Transmitter with Micro Receiver (at least 3 channels)
  • Brushless Motor, SA Sport BL250 (1510-15)
  • Propeller, GWS 6×3 HD
  • Speed Control, 10A
  • Battery, 7.4V 550mAh LiPo

To assemble this kit you’ll need:

  • Glue (medium CA suggested)
  • Covering Film, 1-2 rolls (AeroLITE suggested)
  • Hobby Knife
  • Sanding Block (120/240 grit)
  • Building Board (make one! see our pilot issue)
  • T-Pins
  • Tape, clear and low tack masking

Reviews

There are no reviews yet.

Be the first to review “EZpiet Sky Scout Laser-cut Kit”