1.5mm Bullet Connector Set


Our 1.5mm Bullet Connector Set features three male and female pairs of gold plated brass connectors. Intended for making the connection between a brushless speed control (ESC) and motor. This is the same connector set used on SA Sport motors with the 1504, 1510, and 2204 designations and our 10A ESC (SA Sport 1504, 1510, 2204 and 10A ESC shipped after 12/31/2022 now use the 2mm connector). Added value! Includes heat shrink tube.

Item Number: SAP-BULLET15
Size 1.5mm | Package 3 pair (see additional details below)

This product is currently in stock.

SKU: SAP-BULLET15 Category:


Additional Details

This 1.5mm Bullet Connector set features a gold plated male post that fits into a gold plated split female barrel connector.  The fit of the two parts is very snug.  If you have old hands and eyes, we think the 2.0mm bullet connector will be a better match for you – In fact, as of 12/31/2023 we’ve begun manufacturing all of our smaller SA Sport motors (1504, 1510 and 2204) and 10A ESC using the slightly larger, more user friendly 2mm bullet connector.

Specifications :

(3) Male 1.5mm Male Pin Connectors 7mm L | 2mm OD | 1.4mm Connection Pin
(3) Female Barrel Connectors  7mm L | 2mm OD | 1.25mm ID “split barrel”
Supports up to 0.8mm max wire size (20 AWG)
Includes 6 pieces of Heat Shrink Tubing

Installation Instructions:

Solder the male (pin) connector to the output leads of your motor and insulate with the provided heat shrink tubing.  The heat shrink tubing should cover the base of the male connector, stopping short of the connection pin.

Solder the female (barrel) connector to the motor connection leads of your ESC and insulate with the provided heat shrink tubing.  The heat shrink tubing should completely cover the ends of the female connector.

When installing new connectors on an ESC or Motor, it is suggested to change both the male (pin) and female (barrel) connectors with connectors from the new pack.

Note: This product is manufactured for our line of SA Sport motors, we make no claim as to the suitability for use in other vendor applications.