Search: Advanced search
 

Model Aircraft Product


Articles

Manufacturers


Special

Customer Service

Stevens AeroModel :: Model Airplane Kits :: Short Kits :: StevensAero - stik v2.0 GWS Slow Stick Upgrade Wing Kit Trainer/parkflyer [SA-SKIT-STIK/A/E]

StevensAero - stik v2.0 GWS Slow Stick Upgrade Wing Kit Trainer/parkflyer [SA-SKIT-STIK/A/E]

StevensAero - stik v2.0 GWS Slow Stick Upgrade Wing Kit Trainer/parkflyer [SA-SKIT-STIK/A/E]
 
Stevens AeroModel stik v2 wing kit gws slow stickStevens AeroModel stik v2 wing kit gws slow stick Stevens AeroModel stik v2 tail feathers gws slow stickStevens AeroModel stik v2 tail feathers gws slow stick Stevens AeroModel stik v2 wing tip detail gws slow stickStevens AeroModel stik v2 wing tip detail gws slow stick

Stik v2.0 Updated and Improved

Precision laser cut balsawood electric parkflyer upgrade wing kit. It's Progressive Retrogression! Looking to breath new life into your GWS Slow Stick? Upgrade your Slow Stick with our wing kit for superior flight performance.  Better wind penentration, better stability, wider flight envelope, the ideal parkflyer aileron trainer.  Don't own a Slow Stick? The stik v2.0 can be purchased as a "package deal" with fuselage components for complete airframe. 

Upgrade your Slow Stick with this wing kit by Stevens AeroModel to deliver crisp and responsive performance even in moderate to windy conditions. Generous wing area and Clark Y Airfoil generates a forgiving stall and superb in-flight manners allow you to concentrate on mastering 4 channel flight, practice entry level aerobatics, and grease in those arrivals.

Positively Stable! - Upgrading your Slow Stick with our turn-key wing kit makes for an ideal 4ch aileron trainer. Simply, have your instructor trim your modified Slow Stick for level flight at part throttle; once in trim your model will return to level flight in both roll and pitch axis by simply neutralizing the controls. No costly leveling gadgets, gyros, gizmos, etc. are required stability is just a function of good design. The wing kit features dual aileron servos (R/E/A/A/T), simple to implement, dual aileron servos allow you to spice up your flying with flapperon control, and the redundancy reduce the chance of in-flight failures resulting in a crash.

The wing kit is constructed from AAA hand selected balsa designed, cut, and kitted right here in the USA. Our efficient design and hand selected wood allows us to maximize strength while keeping weight in check. The entire wing frames in about 1 hour and has been designed to be simple to cover and resist warping. This wing kit features a robust hardwood leading edge, strong wood I-Beam construction, and rigid trussed ribs. The design has been developed with first time builders in mind and completely interlocks like a 3-D puzzle you simply cannot make a mistake! Solid trailing edge, ailerons, and empennage resist damage from storage (hangar rash) and easily absorb the bumps and bruises of training far better than your old foam trainer.

This wing kit is offered in short kit form. Please download the instructions from the table below.

Requires:

1 - Fuselage Parts for GWS Slow Stick (GWS AS1 and AS3)
1 - EPS350C-CS Motor - 10x8SF Prop
2 - Sub-Micro Servos (HS-55) (4 servos required if not  upgrading an existing Slow Stick)
1 - 3" Y Harness
1 - Roll of AeroLITE (solite) covering
1 - 1/2 oz. Thin CA Glue.

Details
 
Catalog Number SA-SKIT-STIK/A/E
Inventory Status In stock
Shipping Weight 1.10 lbs
Buy Online: $29.99

Options
 
Quantity Available

Add to cart
        
Add to wish list

Browse...Browse...Browse...
Product comparison 



Design Specifications

 
Recommended Flying Site Soccer Field
Airframe Type Basic Trainer
Aileron Trainer
Control Layout 4 Channel R/E/A/T
5 Channel R/E/A/A/T
Airframe Construction Laser Engineered™ Balsa
Hardware Pack Comprehensive
Product Origin USA
Wing Span (in.) 40
Wing Area (sq. in.) 350
Length (in.) 34
Flying Weight (oz.) 13
Loading (oz. / sq. ft.) 5.34
Power Rating (sug. motor) 60W (EPS-350C-CS)
Propeller GWS 9x7 SF
Speed Control (ESC) Castle Pixie 20P
Battery 1320 mAh (13C) 7.4V
Rudder Servo HS-55
Elevator Servo HS-55
Aileron Servo (1) HS-55
Aileron Servo (2) HS-55
Pilot Skil Level Beginner
Builders Skill Level Beginner
 

Suggested products

#18450
StevensAero - stik v2.0 GWS Slow Stick Upgrade Wing Kit Trainer/parkflyer [SA-SKIT-STIK/A/E]

 Stik v2.0 Updated and Improved - Precision laser cut balsawood electric parkflyer upgrade wing kit. It's Progressive Retrogression! Looking to breath new life into your GWS Slow Stick? Upgrade your Slow Stick with our wing kit for superior flight performance. Better wind penentration, better stability, wider flight envelope, the ideal parkflyer aileron trainer. Don't own a Slow Stick? The stik v2.0 can be purchased as a "package deal" with fuselage components for complete airframe. Click for product details!

 Buy Online: $29.99
Amount: 

#16385
GWS - EPS-350C-CS 5.33:1 RC Electric Power System [GW/EPS-350C-CS/BB]

 GWS - EPS-350C-CS 5.33:1 Power System

 Buy Online: $16.69
Amount: 

#16897
E-Flite - Speed 300 Motor Heat Sink. [EFLH1132]

 Speed 300 RC electric airplane motor heatsink. Ideal fit for GWS EPS-350C gear drives and E-Flite Blade CP helicopters.

 Buy Online: $2.99
Amount: 

#16172
GWS - 9 x 7 SF Propeller [GW/EP9070]

 GWS - 9 x 7 SF Prop

 Buy Online: $1.39
Amount: 

#16140
GWS - 10 x 8 SF Propeller [GW/EP1080]

 GWS - 10 x 8 SF Prop

 Buy Online: $1.69
Amount: 

#16940
GWS - Li-poly Speed Controller 300 J [GWESC300A]

 GWS - Li-poly Speed Controller 300 J

 Buy Online: $12.29
Amount: 

#16646
ThunderPower RC - 1320mAh 7.4v Pro-Lite 2S (JST Connector) [THP13202SJPL]

 The ThunderPower RC 1320mAh 7.4v Pro-Lite lithium polymer (LiPo) battery offers the industry's best power to weight ratio and is backed by solid factory support. This 13C discharge cell is our favorite cell for RC model aircraft applications. Includes gold plated JST connector with high quality silicone wire leads.

 Buy Online: $32.99
Amount: 

#16461
Hitec - HS-55 Sub-Micro Servo JR/RCD/Z Plug [HRC31055S]

 Hitec - HS-55 Sub-Micro Servo JR/RCD/Z Plug

 Buy Online: $13.99
Amount: 

#18647
E-Flite - 3in Y Harness (Universal Plug) 26AWG [EFLRYH3]

 E-Flite - 3in Y Harness (Universal Plug) 26AWG

 Buy Online: $3.99
Amount: 

#18482
GWS - Slow Stick Fuselage Boom w/Hardware [GW/SLOW-STICK-AS1]

 OEM components for the GWS Slow Stick. Includes fiber fuselage, push rods, and fiber leading edge rods. 1 of 2 hardware kits to complete Stevens AeroModel stik or SOARstik airframe.

 Buy Online: $9.99
Amount: 

#18483
GWS - Slow Stick Fuselage Pastic Parts and Hardware [GW/SLOW-STICK-AS3]

 OEM components for the GWS Slow Stick. Includes plastic fuselage parts, landing gear, main wheels, tail wheel. 2 of 2 hardware kits to complete Stevens AeroModel stik or SOARstik airframe.

 Buy Online: $11.49
Amount: 

#17055
NHP - Flash CA Glue, Thin, 1/2oz. [NHP310]

 NHP - Flash CA, Thin, 1/2oz.

 Buy Online: $2.99
Amount: 

Add Checked Items to Cart 

Downloads

Manual Manual (1263 KB)
Finishing Guide Finishing Guide (338 KB)
AeroFILM Guide AeroFILM Guide (35 KB)

Customer feedback

Reviews


Author: Scott Stevens
I put my Stik together in an evening's time and had it flying the following morning. It built up quick and easy, and it flies amazing! I configured mine with flaperons and it will take off and land in about a foot. It handles great in the wind and will land on a dime when there is a slight breeze. It is also capable of every basic aerobatic maneuver. It's an excellent trainer design upgrade from the GWS Slow Stick for a 4 or 5 channel configuration. This is a fantastic airplane!


Author: Thomas Arroyo a.k.a TeamTEOR
I LOVE THIS KIT!! It is my second aileron plane, but the first one that flies right! It is fantastic at slow flight, and just as great with some speed. Since I was able to I set up flaps and now I can even harrier in for a beautiful landing. Thank you Bill! I give this kit a 10 out of 10! The build is fast, very easy (this is my second balsa build), instructions were awesome.


Author: Eric Jorgensen
First "pile o' sticks" model I've built in more than 50 years. Went together (less covering) in less about an hour. The wing is straight and strong right off the bench. After more than a dozen fun flights, a "glitch" (generic malfunction) sent it climbing full throttle on take off and full throttle into the ground. The aluminum stick was totaled in 2 places. The wing and tailfeathers were unscratched except for a small cut in the bottom covering easily taped over. It was back in the air shortly after replacing the $3 stick. A wonder flying airplane and the SA parts are as tough as they come. I see an aileron Squirt 400 and Re-Groove on a future credit card statement...


Author: K.C. Carpenter
Great KIT, great flyer. Makes the GWS Stick a precise smooth flyer. Only issues are back flips are not as easy. But all other maneuvers are crisp and smooth


Author: Randy Kennedy
A joy to fly AND build! Assembled the wing and waited a bit before covering to just looks and the fit of the parts. Awesome! Would be interesting to have a Mk II form that would have larger elevator and rudder controls for more dynamic flight possibilities.


Author: Ron Smith
Nice kit! With the stock gws wing mounts I felt it had too much incidence. So I shimmed the trailing edge of the wing up 3/32". much better.. I put the wing structure together in my LAP.. Way too easy. good job Stevens...


Author: J Kohler
As a relative novice I have really gotten to like the way my little AeroStik flys in my very small field. As you of course know, it has great manners but is very manuverable. Good in the ever present wind too. Thanks. Joe


Author: D Colado
I placed my order for the "STIK," last Friday night and Monday afternoon it was at my door. I cannot begin to tell you how impressed and happy I am with the quality of the lasercut parts. The wing parts practically jumped out of the box and assembled themselves. Just so that you know, I've built some tough wings in the past such as the wing for the Big Telemaster, and Bird of Time. You can be proud of what you do. Marty 57..........


Author: J Hinton
Dear Sirs; I purchased and built one of your Stik kits, and I am delighted with the overall quality and I enjoyed the model's construction. I have flown it about a half dozen times and I believe it flies as well as a .25 size trainer but in a much smaller and less expensive package. I built it with flaperons and love the flaps for landing. I installed a Hi Max 2025 brushless gear motor on the lowest ratio with an APC 12x8 fed by 7.4v 1320 mah Thunder Power lipo. It can sustain a climb of 60 degrees or better albeit with some pilot input. I am also quite pleased with the model's wind penetration capability.


Author: E Corro
I recently purchased your Slow Stik wing kit and was impressed by the design and quality.
The last time I built a stick wing was in 1984, a Goldberg glider, building your kit was a breeze in comparison. I did have to brush up on my cover skills but that was fairly quick and expected.
Good job, I look forward to working with more of your products in the future.


Your cart

User Account


News

Site news and special offers available only by subscription.

Your email:
Subscribe 
The finest laser cut model airplane kits and electric RC parkflyers since 2003. Copyright © 2003-2008 Stevens AeroModel
SSL