Squirt 400 Laser-cut Primary Trainer

From: $98.00

The model that flew across America and survived! Tough enough to endure the Wings Across America program our Squirt™ 400 can handle just about anything the novice pilot can dish out.  This all laser-cut model airplane kit features our innovative tab and notch construction methods – building a straight and true wing and fuselage as easy as gluing your fingers together! The Squirt includes a full hardware pack loaded with high quality Du-Bro hardware, Wheels, Full-Size Plan Sheet, Pre-Bent Landing gear, a detailed step by step photo illustrated instruction manual.  BuildIt!

Made in Colorado, USA
Item Number: SAK-SQRT400
Wing span 38 in. | Wing area 260 in.² | Flying Weight 15 oz. | 3-channel (RET)

 View Product Manual |  Aileron Wing Upgrade Manual

Add the brushless motor option!

Our Squirt 400 was originally designed for a direct drive Speed 400 motor. This Park BL400 (2200KV) is our suggested brushless alternative. (requires motor mount listed below)

In stock

Add a brushless speed controller!

This electronic speed control (ESC) is well matched to our brushless motor option given above. Comes pre-soldered with 3.5mm bullets to match the motor.

Only 2 left in stock

Brushless motor mount option!

This mount will be required for updating the Squirt 400 to brushless motor power.

Only 1 left in stock

Add the propeller!

This propeller is matched to our brushless motor option above. Add one or more now.

In stock

Add two servos! × 2

This mode requires two HS-55 servos.

Out of stock

Add the battery!

This ThunderPower 1350mAh 7.4V battery provides more than enough performance for our Squirt 400.

Only 1 left in stock

Additional Details

Squirt™ 400, Speed 400 Primary Trainer (260in2/38in/400 Brushed)

Specifications

Wing Span | 38 in
Overall Length | 26 in
Wing Area | 260 in²
Flying Weight | 15 oz
Wing Loading | 8.3 oz/ft²

Controls Required | 3 channel, R/E/T
Construction | Balsa / Ply
Category | Parkflyer Primary Trainer

Includes

  • Step-by-step illustrated assembly manual
  • Full size detail drawings
  • Hand selected laser-cut AAA balsa and hardwood stock
  • Pre-formed landing gear
  • Comprehensive hardware package including wheels and push-rods

Required Electronics

The Squirt 400 flies exceptionally well on this traditional brushed power system.  If you wish to convert the model to brushless power, we suggest using our Sport BL400 (2200KV), 10MM mount adapter, and brushless 20A ESC.  As the brushless system is lighter than the intended motor, you’ll need to relocate the servos from the tail into the forward servo mount tray and run this push-rod set.

Required finishing items

  • Optional Aileron Wing Kit – Converts model to 4-Channel Control
  • Covering film | 1 Roll ParkLITE
  • CA Glue | Thin, Medium, and Thick Adhesives

Reviews

There are no reviews yet.

Be the first to review “Squirt 400 Laser-cut Primary Trainer”