Trexler - Hand Pump w/nozzle & valve [TRXHP]

Trexler - Hand Pump w/nozzle & valve [TRXHP]
Product rating
 
(1 reviews)  

Catalog Number
TRXHP
Shipping Weight
0.15 lbs
Product Origin
Made in U.S.A
Retail
29.00 USD
Buy Online
20.00 USD (Save 31%)
OUT OF STOCK

E-mail me when this product is back in stock.  
  • Product Description
  • Related Products
  • Customer Reviews
  • Send to Friend
APPLICATIONS OF TREXLER BALLOON WHEELS

INDOOR FREE FLIGHT AND ELECTRIC

Size Dia. Weight Carrying Capacity
1 1-3/8" .020" 0.15 oz/pair 6 oz/pair
2 1-5/8" .020" 0.15 oz/pair 6 oz/pair
3 1-7/8" .020" 0.30 oz/pair 8 oz/pair
4 2-1/8" .020" 0.30 oz/pair 8 oz/pair
5 2-3/8" .020" 0.35 oz/pair 10 oz/pair
6 2-5/8" .020" 0.35 oz/pair 10 oz/pair

GAS POWERED MODELS

Trexler Balloon Wheels for gas-powered models are made with extra heavy tough rubber. This special construction assures that the tires on these wheels will stand up when subjected to the weight and abuse of gas models.

Size Dia. Weight Carrying Capacity
8-G 2-3/4" .050" 1 oz/pair 6 - 8 lb/pair
9-G 3" .050" 1.5 oz/pair 8-10 lb/pair
10-G 3-1/2" .060" 2 oz/pair 10-12 lb/pair
11-G 4-1/2" .060" 3 oz/pair 12-15 lb/pair

ALWAYS USE A SUITABLE INFLATION PUMP

Related Products

  • Trexler - #01 Pneumatic Balloon Wheels, Pair [TRX01]

    Description:

    Trexler size 1 pneumatic latex balloon wheels.  Product Inflates 1-1/4 to 1-3/8 in. diameter, sold in pairs, and are suitable for free flight and light weight models with a maximum airframe weight of 6 oz.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX01
    18.00 USD
  • Trexler - #10G Pneumatic Balloon Wheels, Pair [TRX10-G]

    Description:

    Trexler size 10G pneumatic latex balloon wheels.  Heavier gauge rubber than sizes 1-6.  Product Inflates to 3-1/2 in. diameter, sold in pairs, and is suitable for larger gas and electric models with a maximum airframe weight of 12 lbs.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX10-G
    44.00 USD
  • Trexler - #11 Pneumatic Balloon Wheels, Pair [TRX11-G]

    Description:

    Trexler size 11G pneumatic latex balloon wheels.  Heavier gauge rubber than sizes 1-6.  Product Inflates to 4-1/2 in. diameter, sold in pairs, and is suitable for larger gas and electric models with a maximum airframe weight of 15 lbs.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX11-G
    44.00 USD
  • Trexler - #02 Pneumatic Balloon Wheels, Pair [TRX02]

    Description:

    Trexler size 2 pneumatic latex balloon wheels.  Product Inflates 1-1/2 to 1-5/8 in. diameter, sold in pairs, and are suitable for free flight and light weight models with a maximum airframe weight of 6 oz.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX02
    18.00 USD
  • Trexler - #03 Pneumatic Balloon Wheels, Pair [TRX03]

    Description:

    Trexler size 3 pneumatic latex balloon wheels.  Product Inflates 1-3/4 to 1-7/8 in. diameter, sold in pairs, and are suitable for free flight and light weight models with a maximum airframe weight of 6 oz.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX03
    18.00 USD
  • Trexler - #04 Pneumatic Balloon Wheels, Pair [TRX04]

    Description:

    Trexler size 4 pneumatic latex balloon wheels.  Product Inflates 2 to 2-1/8 in. diameter, sold in pairs, and are suitable for free flight and light weight models with a maximum airframe weight of 8 oz.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX04
    18.00 USD
  • Trexler - #05 Pneumatic Balloon Wheels, Pair [TRX05]

    Description:

    Trexler size 5 pneumatic latex balloon wheels.  Product Inflates 2-1/4 to 2-3/8 in. diameter, sold in pairs, and are suitable for free flight and light weight models with a maximum airframe weight of 8 oz.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX05
    18.00 USD
  • Trexler - #06 Pneumatic Balloon Wheels, Pair [TRX06]

    Description:

    Trexler size 6 pneumatic latex balloon wheels.  Product Inflates 2-1/2 to 2-5/8 in. diameter, sold in pairs, and are suitable for free flight and light weight models with a maximum airframe weight of 10 oz.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX06
    18.00 USD
  • Trexler - #08G Pneumatic Balloon Wheels, Pair [TRX08-G]

    Description:

    Trexler size 8G pneumatic latex balloon wheels.  Heavier gauge rubber than sizes 1-6.  Product Inflates to 2-3/4 in. diameter, sold in pairs, and is suitable for larger gas and electric models with a maximum airframe weight of 8 lbs.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX08-G
    29.00 USD
  • Trexler - #09G Pneumatic Balloon Wheels, Pair [TRX09-G]

    Description:

    Trexler size 9G pneumatic latex balloon wheels.  Heavier gauge rubber than sizes 1-6.  Product Inflates to 3 in. diameter, sold in pairs, and is suitable for larger gas and electric models with a maximum airframe weight of 10 lbs.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX09-G
    29.00 USD
  • Trexler - Hand Pump w/nozzle & valve [TRXHP]

    APPLICATIONS OF TREXLER BALLOON WHEELS

    INDOOR FREE FLIGHT AND ELECTRIC

    Size Dia. Weight Carrying Capacity
    1 1-3/8" .020" 0.15 oz/pair 6 oz/pair
    2 1-5/8" .020" 0.15 oz/pair 6 oz/pair
    3 1-7/8" .020" 0.30 oz/pair 8 oz/pair
    4 2-1/8" .020" 0.30 oz/pair 8 oz/pair
    5 2-3/8" .020" 0.35 oz/pair 10 oz/pair
    6 2-5/8" .020" 0.35 oz/pair 10 oz/pair

    GAS POWERED MODELS

    Trexler Balloon Wheels for gas-powered models are made with extra heavy tough rubber. This special construction assures that the tires on these wheels will stand up when subjected to the weight and abuse of gas models.

    Size Dia. Weight Carrying Capacity
    8-G 2-3/4" .050" 1 oz/pair 6 - 8 lb/pair
    9-G 3" .050" 1.5 oz/pair 8-10 lb/pair
    10-G 3-1/2" .060" 2 oz/pair 10-12 lb/pair
    11-G 4-1/2" .060" 3 oz/pair 12-15 lb/pair

    ALWAYS USE A SUITABLE INFLATION PUMP
    TRXHP
    20.00 USD

Customer feedback

Average customer rating:
 
(1 reviews)  



1 Most recent customer reviews (see all reviews):
Rodney Helfrich (rhelfrich2001@sbcglobal.net)
This is a great little tool for inflating the Trexler tires. Keeps you from having to blow them up with your mouth, which causes the latex tire valves to stick shut!

Kids love to help you prep and fly tour model airplane. Maybe this will keep a child out of street gangs!

Send to Friend

Your name
Your email
Recipient's email
Add a personal message