StevensAero - SkyBuggy™ (300), Nostalgic Park Flyer

Product rating
 
(3 reviews)  

Catalog Number
SAK-SKYBUG300
Shipping Weight
1.00 lbs
Product Origin
Made in Colorado, U.S.A
Wing Span (in.)
32
Wing Area (sq. in.)
285
Length (in.)
24
Flying Weight (oz.)
12.5
Loading (oz. / sq. ft.)
6.3
Wing Cube Loading
4.5
Control Layout
REAAT
Buy Online
98.00 USD
Quantity

  • Product Description
  • Special Offers
  • Related Products
  • Customer Reviews
  • Send to Friend

Based on an original design by Kris Cartwright.  Stevens AeroModel brings this classic free flight CO2 design to the world of electric RC flight.

SkyBuggy echos the nostalgic lines of the long since discontinued Andy Clancy Lazy Bee model line and features a refreshing splash of Kris Cartwright's own keen eye for design.  When the above is combined with Stevens AeroModel's modern model engineering, clear and thoughtful instructions, and state of the industry cutting techniques the result is simply fantastic on all levels.

Features:
Interlocking Laser Engineered™design frames in two evenings or less
Comprehensive hardware package includes quality Du-Bro RC hardware.  Innovative shock absorbing landing gear smooths out those rough "arrivals"
Thick flat-bottom airfoil nets high-lift and stability.  Well mannered, predictable, and positively stable flight envelope.  Capable of Rudder-Elevator-Throttle aerobatics, including: spins, snaps, stall turns, wing-overs, etc..

Requires:

Basic modeling tools including #11 razor blades and knife, medium and thin CA adhesives, sanding block.

1 - GWS 350C-CS 5.33:1 Motor and Gearbox 9x4.7-10x4.7 SF Propeller
1 - Pair #6 Trexler balloon tire or similar 2" foam wheel
1 - 8-10A ESC (GWS ESC300A)
1 - 800-900mAh 7.4V LiPo battery (Thunder Power Pro-Lite V2)
2 - Micro servo (Hitec HS-55)
1 - Roll AeroFILM or AeroLITE

Last Updated: 07/082010 - Updated instruction manual available for download.

Special Offers

Special offers for this product are available!
This item: StevensAero - SkyBuggy™ (300), Nostalgic Park Flyer [1 item(s)]
List Price: 98.00 USD

Related Products

  • Hitec - HS-55 Sub-Micro Servo JR/RCD/Z Plug [HRC31055S]

    The HS-55 set the standard for affordable performance, offering precision components that have been engineered to provide long lasting trouble free service! Featured in a hundred model aircraft reviews worldwide, the HS-55 is your best choice when it comes to controlling ”smaller” Electric’s and Park Flyers.

    Specifications:

    Motor Type: Coreless
    Bearing Type: None
    Speed (4.8V/6.0V): 0.17 / 0.14 sec @ 60 deg.
    Torque oz./in. (4.8V/6.0V): 15 / 18
    Torque kg./cm. (4.8V/6.0V): 1.08 / 1.30
    Size in Inches: 0.89 x 0.45 x 0.94
    Size in Millimeters: 22.61 x 11.43 x 23.88
    Weight ounces: 0.28
    Weight grams: 7.94
    HRC31055S
    13.99 USD
  • GWS - 10 x 4.7SF Propeller [GW/EP1047]

    GWS - 10 x 4.7SF Prop
    GW/EP1047
    2.39 USD
  • ZAP - CA Glue, 1/2 oz. [PAAPT09]

    ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.

    SUPERIOR PENETRATING FORMULA
    SUPER THIN - WATER LIKE CONSISTENCY
    BONDS AND CURES IN 1 TO 5 SECONDS
    WORKS ON MOST MATERIALS
    PAAPT09
    4.99 USD
  • ZAP - Zap-A-Gap CA+, 1/2 oz. [PAAPT03]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT03
    4.99 USD
  • ZAP - Slo Zap CA Glue, 1oz. [PAAPT20]

    SLO ZAP CA Is called a thick formula. The thicker the formula, the slower the cure time, that’s why we call it SLO ZAP. Although it is thick it is still a liquid and will flow. Penetration into porous materials is very minimal. SLO ZAP is an excellent gap filler and provides extra time when positioning wood parts. In modeling its ideal for laminating wood parts and forming fillets. Because its thick, it will not run, it forms a very clean even fillet around all types of joints. The high cured strength means it works great on higher stress areas.

    VERY HIGH VISCOSITY FORMULA
    SUPER THICK AND SUPER STRONG
    ALLOWS PART POSITIONING FOR APPROXIMATELY 30 TO 40 SECONDS
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT20
    7.99 USD
  • ZAP - Flexi Tips (24 / pkg.) [PAAPT21]

    Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
    PAAPT21
    4.99 USD
  • AeroLITE (SOLITE) Yellow, Bright - 2M Roll [SOLITE-Y]

    AeroLITE (SOLITE) Bright Yellow, 78 in. x 27.5 in. (2000mm x 700mm). 2M Roll for larger projects. Ultra light iron-on self-adhesive film (polypropylene) for electric park flyers, indoor, and micro model aircraft. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    SOLITE-Y
    19.99 USD
  • AeroLITE (SOLITE) Black - 2M Roll [SOLITE-BK]

    AeroLITE (SOLITE) Black, 72 in. x 27.5 in. (2000mm x 700mm). 2M Roll for larger projects. Ultra light iron-on self-adhesive film (polypropylene) for electric park flyers, indoor, and micro model aircraft. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    SOLITE-BK
    19.99 USD
  • StevensAero - Float Kit for SkyBuggy (S300) Park Flyer

    Extend the functionality of your SkyBuggy to include water sorties! Laser cut float kit designed exclusively for the Stevens AeroModel SkyBuggy (S300). Float kit includes all laser cut parts, pre-bent struts, mounting hardware, and photo illustrated build manual.

    Includes:

    Laser cut balsa and hardwood components
    Hardware
    Pre-bent struts
    Illustrated instruction manual

    Requires:

    Stevens AeroModel SkyBuggy (S300) model airplane kit
    CA glue
    Sanding Block
    Covering film (AeroFILM recommended)
    SAK-SKYFLOAT300
    45.00 USD
  • SkyBuggy S300 - Landing Gear [SAP-SKYBUG300/LG]

    Wire landing gear assembly. Fits SkyBuggy S300 model
    SAP-SKYBUG300/LG
    4.99 USD

Customer feedback

Average customer rating:
 
(3 reviews)  



3 Most recent customer reviews (see all reviews):
Hans
May 26, 2014
Very nice and fun build. Super cool looking little bird... I decided to give it a try with a little dihedral. Now...wow, what a joy! Super fun, even rolls nicely. Can be manhandled into small areas, tight turns with full control. My suggestion to other flyers: try a little dihedral, and you'll have one of the best flying parkflyers around.
Steve Brenner (sblbeb@roadrunner.com)
This is an excellent kit. The laser cutting is the best I have ever seen. The parts fit together very smoothly. I was able to frame up all the pats in one evening. The instructions are also excellent and have pictures for each step. This kit comes with everything except Tx/Rx, servos, esc, motor, covering and tires. They include all other small bits and pieces down to magnets for the hatch, ez connectors, control horns and everything else needed to get it flyingIf this is an example of the kits, I see myself ordering many more from StevensAero.
I give this a solid 10 out of 10.
Rene Wallage (rwallage@bezeqint.net)
Great and very complete kit with excellent instructions! A very relaxing build, followed by a very relaxing maiden flight. Highly recommended. The build can be done by an absolute beginner.
My next kit will very likely be another Stevens AeroModel...

Send to Friend

Your name
Your email
Recipient's email
Add a personal message