StevensAero - SCRAM! Control Line Combat Model [SAK-SCRAM100]

Product rating
 
(2 reviews)  

Catalog Number
SAK-SCRAM100
Shipping Weight
0.50 lbs
Product Origin
Made in Colorado, U.S.A
Wing Span (in.)
18
Wing Area (sq. in.)
100
Length (in.)
12.25
Flying Weight (oz.)
4
Loading (oz. / sq. ft.)
5.8
Wing Cube Loading
6.9
Power Rating (Watts)
50
Propeller
6x3
Speed Control (ESC)
10A
Battery
7.4V LiPo
Buy Online
45.00 USD
Quantity

  • Product Description
  • Related Products
  • Customer Reviews
  • Send to Friend
The SCRAM! from Stevens AeroModel electrifies the 1/2A control line combat class with a quick building sturdy airframe that's highly maneuverable yet smooth and predictable.  Ideal electric entry into combat control line or as wild stunter!

Features:
  • Fun Control Line Combat Stunter.
  • Quiet clean electric motor fly in neighborhood parks, large backyards, and even indoors!
  • Laser Engineered precision laser cut components for true interlocking construction. Light yet rugged airframe survives the rigors of training.
  • Ground adjustable throttle combined with electric power system (see "You'll Need" tab below) allows you to dial in a flying speed from mild to wild and flight duration from one to several minutes.
Product Includes:
  • Precision laser cut balsa and hardwood components.
  • Control horn, linkage, and bellcrank.
  • Motor mount.
  • Photo-illustrated assembly manual.

Required To Complete:
  • Park 300 or SA Sport 300 (2204-19) Brushless Outrunner Motor
  • 10A Brushless ESC
  • Control Line Timer
  • 240-350mAh 11.1V LiPo Battery (20C)
  • 1/2A control line handle and lines
  • 1 roll AeroFILM or AeroLITE covering
  • Thin, Medium, and Thick CA glue
  • Basic modeling tools

Related Products

  • SA Sport - Park BL300 1400KV (A2204-14) Brushless Outrunner Motor [SUPA2204-14]

    Features:
    An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells. Very lightweight at 21.5 grams including integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall mount. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range. The motor features a 3mm hardened steel shaft, dual ball bearings, integral prop saver for APC E props and integral firewall mount flange. Note that the prop saver is sized for APC props. GWS props will need some modification to fit properly. Countersunk mounting holes have 31mm spacing on centers. Similar to: AXI 2203/52, AXI 2204/54
     
    Limited Warranty:
    This product is guaranteed to arrive to you operational, beyond that no additional warranty, guarantee of suitability, offer of service, or replacement is provided. We allow 30 days from the date of purchase for the end user to verify the function of this product and make a warranty claim.
     
    Extended Warranty (available as an option only at time of purchase):
    With purchase of extended warranty, Stevens AeroModel will repair or replace this item once within one year of date of purchase, no questions asked.  To redeem extended warranty defective item must be returned, at senders expense, to Stevens AeroModel along with copy of purchase receipt.  International warranty claims will be charged 5.00 USD (return postage and handling).
    SUPA2204-14
    20.00 USD
  • SA Sport - 10A Brushless ESC (2-3 Cell LiPo Safe) [SUP10AESC]

    Features:

    • Auto-detects 2 or 3 cell Li-Poly pack and adjusts cut-off voltage
    • Beeps number of cells at startup
    • Auto-learns throttle range
    • Auto-timing
    • Safe start
    • 1A BEC - supports 3 servos
    • Flexible silicone wire  

    Special Instructions: Never exceed the recommended battery voltage listed on the package. Do not use a separate battery supply with this controller. Never disconnect the battery supply when the motor is running.

    Limited Warranty:

    This product is guaranteed to arrive to you operational, beyond that no additional warranty, guarantee of suitability, offer of service, or replacement is provided. We allow 30 days from the date of purchase for the end user to verify the function of this product and make a warranty claim.

    Extended Warranty (available as an option only at time of purchase):
     
    With purchase of extended warranty, Stevens AeroModel will repair or replace this item once within one year of date of purchase, no questions asked.  To redeem extended warranty defective item must be returned, at senders expense, to Stevens AeroModel along with copy of purchase receipt.  International warranty claims will be charged 5.00 USD (return postage and handling).
    SUP10AESC
    15.00 USD
  • GWS - 6 x 3 Direct Propeller Electric [GW/EP6030]

    GWS - 6 x 3 Direct Prop Electric
    GW/EP6030
    1.59 USD
  • Control Line Handle for 1/2A, includes dacron lines and clips [SIGSH544]

    Control Line Handle for 1/2A, includes dacron lines and clips.
    SIGSH544
    7.99 USD
  • Control Line Reel [SIGSH441]

    Control Line Reel
    SIGSH441
    3.99 USD
  • Small Control Conector 15 LB Test (qty. 4) [SIGSH445]

    Small Control Conector 15 LB Test (qty. 4)
    SIGSH445
    1.99 USD
  • ZAP - CA Glue, 1/4 oz. [PAAPT10]

    ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.

    SUPERIOR PENETRATING FORMULA
    SUPER THIN - WATER LIKE CONSISTENCY
    BONDS AND CURES IN 1 TO 5 SECONDS
    WORKS ON MOST MATERIALS
    PAAPT10
    3.99 USD
  • ZAP - Zap-A-Gap CA+, 1/2 oz. [PAAPT03]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT03
    4.99 USD
  • ZAP - Flexi Tips (24 / pkg.) [PAAPT21]

    Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
    PAAPT21
    4.99 USD
  • Sanding Block Dual Grit 120/240

    This a great little item. Sanding block is made from very high density foam and features fine 240 and extrafine 120 grit papers. This block won't deform and cause waves in your project like those cheap hardware store sanding sponges.
    SA-TOOL/SB120240
    1.99 USD
  • E-Zee Electric Control Line Timer (ECL)

    The Mk 4 E–Zee (ECL), Electric Control Line Timer retains all the key features of the previous model with the addition of an output for a retract servo and various programing and detail improvements.

    Programing Features:

    • novice and expert timing modes for shorter/longer flights
    • novice-10 to 100 seconds, set in 10 second increments
    • expert -1 to 10 minutes, set in 1 minute increments
    • programmable start delay (for solo operation) –0 to 90 seconds
    • motor power-adjustable from zero to full throttle (by potentiometer)
    • end of flight warnings -visual(high intensity LED) and motor power ‘burps’
    • motor soft start -adjustable 0 to 9seconds
    • motor run down -adjustable 0 to 9seconds
    • undercarriage servo (if used) -retracts 10seconds after flight commences and deploys 10seconds before the flight terminates. Operates in expert mode only
    • take off power boost option(3 secs of maximum power)
    • push button immediately stops the motor at any point during the flight profile
    • all settings are saved in memory -so a single button push serves to repeat a flight.
    • provision to fit remote pushbutton and remote LED
    • unique CONFIG mode for setting up ESCs without additional equipment (programming card or RX/TX otherwise required) 

    Dimensions:

    Length 42mm | Width 20mm | Height 9mm | Weight 3.5g

    Product Features:

    The timer is supplied with a comprehensive instruction manual and users guide.

    Remote pushbutton and remote LED are available as a plug and play option, for applications where the timer is not able to be mounted, in a readily accessible from outside the model.

    Why choose a Den's Model Supply E-Zee Timer?

    Electric Flight is clean and quiet, making it ideal for sports flying in the 21st century environment. The huge Electric RC market ensures that components such as motors and ESC’s for Free Flight are available at very attractive prices and are totally reliable. Battery technology has progressed such that the weight of an electric power train can be similar or better than conventional glow or diesel power. The range of E-ZEE timers have been designed and developed so that sports flyers can enjoy all these advantages at a realistic price.

    The timers have been designed and manufactured by Alan Bond of Forge Electronics in the UK exclusively for Dens Model Supplies, Stevens AeroModel www.stevensaero.com is the exclusive stockist in the USA.

    EZEE_ECL04
    27.50 USD

Customer feedback

Average customer rating:
 
(2 reviews)  



2 Most recent customer reviews (see all reviews):
Konrad
Oct 14, 2016
These are great models! They actually perform all the maneuvers needed for combat flying! Time has shown a few very minor issues. First the E-flite timer is no longer available. I use a Hubin timer
http://brodak.com/timer-fm-0c-for-super-clown.html. I’d like to see Steven’s Models adjust the cut files for this new timer. Also the crimp tubes are a bit too small for the lead out. I had to add nose weight so I think a slightly bigger motor would help like a 2208/12 with a thin blade 7x5. Prop selection has a huge effect on performance. I’d like to see Steven’s Models market a dual kit, after all you need another for combat! For a more detailed review look here
http://www.hippocketaeronautics.com/hpa_forum/index.php?topic=17913.0
Bob Mears
Dec 22, 2014
Fantastic kit! All parts fit perfect. Airplane flies well as a combat trainer. Dont expect a 1/2A competition plane. But lots of fun to build and I can fly it in my back yard. Kit is so good I plan on building some of the stunt planes too.

Send to Friend

Your name
Your email
Recipient's email
Add a personal message