StevensAero - S-POU!™ V2.4 Micro RC Kit [SAK-SPOU!2.4]

Product rating
 
(1 reviews)  

Catalog Number
SAK-SPOU2.4
Shipping Weight
0.51 lbs
Product Origin
Made in Colorado, U.S.A
Wing Span (in.)
17.75
Wing Area (sq. in.)
125
Length (in.)
12
Flying Weight (oz.)
1.4
Loading (oz. / sq. ft.)
1.6
Wing Cube Loading
1.7
Control Layout
RET
Retail
70.00 USD
Buy Online
55.00 USD (Save 21%)
Quantity

  • Product Description
  • Related Products
  • Customer Reviews
  • Send to Friend
S-POU! inspired by the Pou De Ciel (Flying Flea) - Based on the flight mechanics of Henri Minet's Flying Machine this tandem wing DiddleBug explores pitch control of the main wing and provokes all kinds of ogling at local indoor events!

Beginners will appreciate this affordable design, simple single surface wing, low parts count, and self jigging fuselage that builds straight every time. The gentle handling S-POU! will not spin and stalls are always clean, predictable, and straight ahead. Slow speed, wide flight envelope, and forgiving handling keeps the new pilot from trouble and the low mass, durable, all balsa construction makes encounters with the ground a non-event. Should you find your S-POU! requires repair; damage is easily fixed at the field in seconds with thin CA glue.

Designed to accept the popular ParkZone (PKZ3351) 2.4ghz Spektrum DSM2 Rec/ESC/Servo combo unit and PKZ3624 motor and gearbox.

Related Products

  • Du-Bro RC - 1.25 in. Mini Lite Wheels (2) [DUB125MW]

    Key Features:

    2 per package
    Light weight design
    1.10 gr. per wheel

    Overview:

    Ideal for indoor and park flyers. Du-Bro RC Mini Lite Wheels are lightweight and features a 2 piece press together hub and a super light foam tire. Comes standard with .047 axle hole and can be drilled out for larger diameter axles.

    These Mini Lite Wheels are sure to give your airplane that scale look.
    DUB125MW
    4.49 USD
  • Ultra-Micro 3 Channel Receiver/ESC/Servo Combo [Replaces UA1151/PKZ3351]

    This OEM ParkZone PKZ3352/U1152 Ultra Micro Receiver/ESC/Servo "puck" is a factory replacement unit for the ParkZone Vapor, Ember 2, HobbyZone Champ and many other Ultra-Micro model aircraft distributed by Horizon Hobby.  The PKZ3352 is compatible with all ParkZone, E-Flite, HobbyZone, and Spektrum DSM2 compatible 2.4ghz transmitters.  This product will not fuction with Airtronics, Futaba, Hitec, or other non DSM2 compatible transmitter.

    The PKZ3352 weighs 3.3g and features an on-board receiver, electronic speed control (ESC), and servos mapped to Elevator (pitch) and Aileron (roll) transmitter channels. This configuration is Ideal for control of Rudder/Elevator three channel models. Two linear drive servos built atop a receiver/esc "puck" featuring a pre-soldered battery connector and motor plug.

    • Weight: 3.3g
    • Input Voltage: 3.7V (1S Lipo)
    • Compatible with PKZ3624 motor/gearbox

     

    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3352/U1152
    59.99 USD
  • Ultra-Micro Motor and Gearbox [PKZ3624]

    High performance ParkZone PKZ3624 coreless brushed motor mounted in gearbox compatible with Horizon Hobby distributed Ultra Micro models (ParkZone, HobbyZone, and E-Flite)
    • OEM motor for ParkZone P-51, Sukhoi, and E-Flite T-28 Trojan
    • Ideal for aerobatic models weighing up to 1.3 oz and sport/scale models up to 2.5 oz
    • Suggested for many Stevens AeroModel ultra-micro model airplane kits
    • Compatible with EFL9051 propeller
     
     
    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3624
    15.99 USD
  • Ultra Micro Propeller 130mm x 70mm (1) [EFL9051/PKZ3601/HBZ4401]

    Ultra Micro Propeller (1) - 130mm x 70mm. This propeller was designed for the E-Flite 4-Site and is same propeller used by the UM P-51 by ParkZone. Also recommended for all micro models by Stevens AeroModel that utilize the PKZ3624 Motor and Gearbox. Package includes one 130mm x 70mm propeller with foam rubber spinner.

    (Note: propeller is installed by threading onto the output shaft of the pKZ3624 gearbox.)

    Part replaces EFL9051, PKZ3601, and HBZ4401

    SA-EFL9051
    4.99 USD
  • Du-Bro RC - Double Sided Tape Assortment (1/32 [DUB634]

    Du-Bro RC - Double Sided Tape Assortment (1/32
    DUB634
    2.39 USD
  • ZAP - CA Glue, 1/4 oz. [PAAPT10]

    ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.

    SUPERIOR PENETRATING FORMULA
    SUPER THIN - WATER LIKE CONSISTENCY
    BONDS AND CURES IN 1 TO 5 SECONDS
    WORKS ON MOST MATERIALS
    PAAPT10
    3.99 USD
  • ZAP - Zap-A-Gap CA+ Glue, 1/4 oz. [PAAPT04]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT04
    3.99 USD
  • ZAP - Flexi Tips (24 / pkg.) [PAAPT21]

    Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
    PAAPT21
    4.99 USD
  • Sanding Block Dual Grit 120/240

    This a great little item. Sanding block is made from very high density foam and features fine 240 and extrafine 120 grit papers. This block won't deform and cause waves in your project like those cheap hardware store sanding sponges.
    SA-TOOL/SB120240
    1.99 USD
  • AeroLITE (SOLITE) Bright White - PatchPak [SOLITE-XW]

    AeroLITE (SOLITE) Bright White, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XW
    5.49 USD
  • AeroLITE (SOLITE) Bright Red - PatchPak [SOLITE-XR]

    AeroLITE (SOLITE) Bright Red, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XR
    5.49 USD

Customer feedback

Average customer rating:
 
(1 reviews)  



1 Most recent customer reviews (see all reviews):
Mark Koerner
Quality from start to finish. The plane builds really well and had a problem free (after trimming) maiden flight. Flew it indoors (local golf dome) and it got more attention than anything else there that night. Found some youtube videos of full scale pou du ciel's and the model flies and looks like them in the air. Great job guy's!

Send to Friend

Your name
Your email
Recipient's email
Add a personal message