With the exception of a new side-by-side fuselage, The PA-15 Vagabond utilized much of the same production tooling of the Piper Cub, allowing the aircraft to be built with minimal costs, and is credited with saving Piper Aircraft from bankruptcy after WWII. Our micro indoor version of this historic aircraft features docile handling, simple assembly, and has been engineered to readily accept popular ParkZone Ultra Micro DSM2 electronics.
This OEM ParkZone PKZ3352/U1152 Ultra Micro Receiver/ESC/Servo "puck" is a factory replacement unit for the ParkZone Vapor, Ember 2, HobbyZone Champ and many other Ultra-Micro model aircraft distributed by Horizon Hobby. The PKZ3352 is compatible with all ParkZone, E-Flite, HobbyZone, and Spektrum DSM2 compatible 2.4ghz transmitters. This product will not fuction with Airtronics, Futaba, Hitec, or other non DSM2 compatible transmitter.
The PKZ3352 weighs 3.3g and features an on-board receiver, electronic speed control (ESC), and servos mapped to Elevator (pitch) and Aileron (roll) transmitter channels. This configuration is Ideal for control of Rudder/Elevator three channel models. Two linear drive servos built atop a receiver/esc "puck" featuring a pre-soldered battery connector and motor plug.
Ultra Micro Propeller (2/pkg) - 130mm x 70mm. This propeller was designed for the E-Flite 4-Site and is same propeller used by the UM P-51 by ParkZone. Also recommended for all micro models by Stevens AeroModel that utilize the PKZ3624 Motor and Gearbox. Package includes one 130mm x 70mm propeller with foam rubber spinner.
(Note: propeller is installed by threading onto the output shaft of the pKZ3624 gearbox.)
ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.
SUPERIOR PENETRATING FORMULA
SUPER THIN - WATER LIKE CONSISTENCY
BONDS AND CURES IN 1 TO 5 SECONDS
WORKS ON MOST MATERIALS
ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.
SUPERIOR GAP FILLING FORMULA
MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
AVERAGE OF 20 SECONDS FOR CURING
WORKS ON OILY SURFACES
USE ZIP KICKER TO ACCELERATE CURE TIME
Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
AeroLITE (SOLITE) Bright Yellow, 11 in. x 27.5 in. (275mm x 700mm). Folded package.
Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.
Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
This a great little item. Sanding block is made from very high density foam and features fine 240 and extrafine 120 grit papers. This block won't deform and cause waves in your project like those cheap hardware store sanding sponges.
Ordering Instructions: 1) Prior to adding this item to your cart fill in the form below titled "Enter Kit and Sheet Number" with the model airplane kit and desired sheet number you wish to re-order. (Every Stevens AeroModel kit has the sheet number or sheet ID engraved on the cut sheet and/or listed in your product manual.) 2) Order one unit of this product per full laser cut sheet required. Thus, if you need to order multiple sheets or multiple copies of a single sheet, the order quantity of this item must match your requested sheet count. 3) Please be aware that this item is cut to order and will add 3-5 business days to the processing of your order.
This is my first experience with any airplane kit and I am really pleased with the results. The quality of the parts and the instructions are excellent. Air frame went together very quickly and was easy to get the results I wanted. The only problem I had was covering the model, but that was due to my lack of experience. Model flies incredibly well and is easier to control than my son's Hobbyzone Champ. I would recommend this as a first plane since it is much more durable than the foam planes. I will be buying several more Stevens Aero kits since they are an excellent product.
Sep 27, 2013
A great little kit that goes together quickly and flies great. It took me longer to find a trim scheme than to build. A great little scale plane!
Just ordered the 1911 Caudron Racer. I love these precious little easy to assemble airplanes. I'm old enough to have seen the real one, a much later model fly in i believe 1936 in the air races held here at Mines field now called LAX. California....
Just finished building my 3rd micro kit, had fun doing this kit like the other 2 kits I built. The Fly Baby I built is a kick in the*** to fly, I just hope the new kit of the Heath LNB 4 is as much fun to fly. so if you like the challenge of build...
— Tony Scavello
Stevens kits are by far the best I've built ! The quality of balsa and parts are superior and the instructions are easy to follow. I got the opportunity to meet Bill in person, he is a true ambassador of the hobby!
I just flew the Helium MG-3 for the first time today, and it was a great success. It was my first build, although I do have a lot of woodworking experience. The kit went together perfectly and the instructions were excellent throughout. It was a r...
— Julian Behrisch Elce
Some of the best plan details I have seen with clear instructions. The laser cut balsa is a dream to work with as the parts fits perfectly with no adjustments needed. (I remember the balsa kits I worked with in my younger days with pins and glu...
— George Grueber
Outstanding! I just finished the Fokker D7 and gave it a test flight. I had not worked with balsa since I was a kid(too many years ago). Yours is the best kit I have ever seen. I purposely took my time because it was so enjoyable and I especially ...
— Fernando Engelsma
I have been trading your (micro) kits to a young man (12 years old) for yard work. I think I've created a new model builder !!! He loves it. Another friend, who only flew 3/D worked together with me building your "Helium MG2" glider. We couldn...
— Norm Smith
I can't believe the quality of your kits! I've been building models since the early 50's and have never had the pleasure of something as enjoyable as your S-POU kit. The parts fit is astounding, the plans are first class and the engineering is a...
— Erick J Villano
Great kits, great customer service, great times flying!!!
— Gabriel Matheny
I bought a helium a year ago built this plane and flew it for about a year and love it. It was fun building this plane and I would recommend it to anyone who likes to build an fly it has been fun.