Free domestic shipping for orders over 150.00 USD

more details

StevensAero - Pacemaker 100, Nostalgic RC Old Timer

Product rating
 
(0 reviews)  

Catalog Number
SAK-PMKR100
Shipping Weight
0.60 lbs
Product Origin
Made in Colorado, U.S.A.
Wing Span (in.)
27.25
Wing Area (sq. in.)
100
Length (in.)
18.75
Flying Weight (oz.)
2
Loading (oz. / sq. ft.)
2.9
Wing Cube Loading
3.5
Control Layout
RET
Retail
65.00 USD
Buy Online
55.00 USD (Save 15%)
Quantity

  • Product Description
  • Related Products
  • Customer Reviews
  • Send to Friend

The original Pacemaker was designed by JL Sadler in 1940 and is indeed a unique "old timer" design. Inspired by the original, the Stevens AeroModel Pacemaker kit features state of the art construction techniques that you've come to expect from StevensAero.com

This laser-engineered kit includes: 

  • Hand selected AAA balsa
  • Precision laser-cut parts
  • Hardware; push-rods, control horns, landing gear wire, and wheels
  • Full size detail sheet including trim templates to complete the model as pictured.

Recommended building supplies:

  • Thin and Medium CA Glue
  • #11 Razor Blades and Hobby Knife
  • Sanding Block with 220 and 400 grit paper
  • Hook and loop tape for battery mounting (PKZ1039)
  • 2 AeroLITE PatchPak (Base Color) 1 AeroTRIM (Trim Color)
  • Optional pre-cut vinyl graphics are available to complete this model as pictured.

Designed for the following electronics:

  • ParkZone PKZ3352 Ultra-Micro Receiver/ESC/Servo "Brick"
  • ParkZone PKZ3624 Motor and Gearbox
  • Battery 160mAh 3.7V LiPo with UM compatible connector
  • E-Flite EFL9051 Propeller

See our list of related products ("related products" tab) for items we stock to assist you in completing this model.

Related Products

  • Ultra-Micro 3 Channel Receiver/ESC/Servo Combo [Replaces UA1151/PKZ3351]

    This OEM ParkZone PKZ3352/U1152 Ultra Micro Receiver/ESC/Servo "puck" is a factory replacement unit for the ParkZone Vapor, Ember 2, HobbyZone Champ and many other Ultra-Micro model aircraft distributed by Horizon Hobby.  The PKZ3352 is compatible with all ParkZone, E-Flite, HobbyZone, and Spektrum DSM2 compatible 2.4ghz transmitters.  This product will not fuction with Airtronics, Futaba, Hitec, or other non DSM2 compatible transmitter.

    The PKZ3352 weighs 3.3g and features an on-board receiver, electronic speed control (ESC), and servos mapped to Elevator (pitch) and Aileron (roll) transmitter channels. This configuration is Ideal for control of Rudder/Elevator three channel models. Two linear drive servos built atop a receiver/esc "puck" featuring a pre-soldered battery connector and motor plug.

    • Weight: 3.3g
    • Input Voltage: 3.7V (1S Lipo)
    • Compatible with PKZ3624 motor/gearbox

     

    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3352/U1152
    59.99 USD
  • Ultra-Micro Motor and Gearbox [PKZ3624]

    High performance ParkZone PKZ3624 coreless brushed motor mounted in gearbox compatible with Horizon Hobby distributed Ultra Micro models (ParkZone, HobbyZone, and E-Flite)
    • OEM motor for ParkZone P-51, Sukhoi, and E-Flite T-28 Trojan
    • Ideal for aerobatic models weighing up to 1.3 oz and sport/scale models up to 2.5 oz
    • Suggested for many Stevens AeroModel ultra-micro model airplane kits
    • Compatible with EFL9051 propeller
     
     
    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3624
    15.99 USD
  • E-Flite - Ultra Micro Propeller 130mm x 70mm (2) [EFL9051/PKZ3601]

    Two Pack of Ultra Micro Propellers (with small foam spinner) 130mm x 70mm this propeller was designed for the E-Flite 4-Site and is same propeller used by the UM P-51 by ParkZone. Also recommended for the LiddleRod, PuddleBug, and S-POU! micro models by Stevens AeroModel.
    SA-EFL9051
    4.99 USD
  • ZAP - Zap-A-Gap CA+ Glue, 1/4 oz. [PAAPT04]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT04
    3.99 USD
  • ZAP - Flexi Tips (24 / pkg.) [PAAPT21]

    Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
    PAAPT21
    4.99 USD
  • Sanding Block Dual Grit 120/240

    This a great little item. Sanding block is made from very high density foam and features fine 240 and extrafine 120 grit papers. This block won't deform and cause waves in your project like those cheap hardware store sanding sponges.
    SA-TOOL/SB120240
    1.99 USD
  • Hook and Loop Set (5) for Ultra Micro Aircraft

    This hook and loop tape is well suited for use on indoor and micro aircraft. Package includes 5 hook and loop pairs 5/16 in. x 2-1/8 in. strips.
    PKZ1039
    4.19 USD
  • AeroLITE (SOLITE) Bright Red - PatchPak [SOLITE-XR]

    AeroLITE (SOLITE) Bright Red, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XR
    5.49 USD
  • AeroLITE (SOLITE) Bright White - PatchPak [SOLITE-XW]

    AeroLITE (SOLITE) Bright White, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XW
    5.49 USD
  • Pacemaker 100 Vinyl Decal and Markings

    CNC cut decal and markings for the Stevens AeroModel Pacemaker (100) are precision cut from premium 2 mil white vinyl and masked with low tack transfer tape.

    SAP-PMKR100/DECAL
    7.99 USD

Customer feedback

There have been no reviews


Send to Friend

Your name
Your email
Recipient's email
Add a personal message