Free domestic shipping for orders over 150.00 USD

more details

StevensAero - 1911-1/2 Nieuport (Toon) UM, Laser-cut model airplane kit

Product rating
 
(2 reviews)  

Catalog Number
SAK-NIEUPORTUM1
Shipping Weight
0.38 lbs
Product Origin
Made in Colorado, U.S.A.
Wing Span (in.)
16.5
Wing Area (sq. in.)
63
Length (in.)
15
Flying Weight (oz.)
1.75
Loading (oz. / sq. ft.)
4
Wing Cube Loading
6
Control Layout
RET
Buy Online
39.00 USD
Packaged Options
Quantity
E-mail me when this product is back in stock.  

  • Product Description
  • Related Products
  • Customer Reviews
  • Send to Friend

Background:

The ToonScale 1911-1/2 Nieuport UM is the second in the Great Race! series of micro model aircraft kits from Stevens AeroModel. Unlike the previous release (Demoiselle), the Nieuport did not see action in the 1965 movie “Magnificent Men in Their Flying Machines”. The Nieuport did, however, see plenty of action in air races of the period that the classic move was based on. With it’s quirky lines and smooth handling we were inspired to offer this classic design in our Great Race line-up.

Stevens AeroModel has engineered this kit to take advantage of advanced interlocking cutting techniques and specialized laser cut assembly methods pioneered by Stevens Aero. In addition to the high-quality sorted and precision cut components, this model has been tightly engineered around popular ParkZone micro electronics that are readily available from StevensAero.com or your local hobby supply.

We hope you enjoy building, flying, and racing your ToonScale Nieuport as much as we have enjoyed the process of vetting it and bringing it to market.

Kit Includes:

  • Precision laser cut parts 
  • Full size detail sheets with markings template
  • Photo illustrated step-by-step assembly instructions
  • Hardware package including push-rods, control horns, struts, engine details, spoked wheels.

 

Kit Requires:

  • 1/2 oz. Thin and Medium CA glues
  • Sanding Block with 220 grit paper
  • AeroLITE covering film (Antique White/Cream and Bright Red as shown- Two Patch Packs Suggested)
  • Optional full-color pre-cut decals and markings package, complete with toon pilot and co-pilot figures!
  • Reciever, ParkZone PKZ3352 Receiver/ESC/Servo unit
  • Motor, PKZ3624 
  • Propeller, 130mm x 70mm EFL9051
  • Battery, 130-160mAh 1S 3.7V liPo
  • Compatible Spektrum DSM2, ParkZone, or E-Flite Radio

 

Optional Finish Packages - 1911-1/2 Nieuport color scheme:

  • Purchase our "Recruit Package" which includes the comprehensive airframe kit along with full-color decal set and cartoon pilot figures.  
  • Our "Flyboy Package" includes the comprehensive airframe kit, decal set (as above), and covering (two PatchPaks of AeroLITE - (bright red and antique/cream white).
  • The "Ace Package" is your best value and includes:  Comprehensive airframe kit, decal set, covering, motor/gearbox (PKZ3624), and propeller.  Just add your DSM2 compatible receiver (PKZ3352) and transmitter!

Related Products

  • Ultra-Micro 3 Channel Receiver/ESC/Servo Combo [Replaces UA1151/PKZ3351]

    This OEM ParkZone PKZ3352/U1152 Ultra Micro Receiver/ESC/Servo "puck" is a factory replacement unit for the ParkZone Vapor, Ember 2, HobbyZone Champ and many other Ultra-Micro model aircraft distributed by Horizon Hobby.  The PKZ3352 is compatible with all ParkZone, E-Flite, HobbyZone, and Spektrum DSM2 compatible 2.4ghz transmitters.  This product will not fuction with Airtronics, Futaba, Hitec, or other non DSM2 compatible transmitter.

    The PKZ3352 weighs 3.3g and features an on-board receiver, electronic speed control (ESC), and servos mapped to Elevator (pitch) and Aileron (roll) transmitter channels. This configuration is Ideal for control of Rudder/Elevator three channel models. Two linear drive servos built atop a receiver/esc "puck" featuring a pre-soldered battery connector and motor plug.

    • Weight: 3.3g
    • Input Voltage: 3.7V (1S Lipo)
    • Compatible with PKZ3624 motor/gearbox

     

    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3352/U1152
    59.99 USD
  • Ultra-Micro Motor and Gearbox [PKZ3624]

    High performance ParkZone PKZ3624 coreless brushed motor mounted in gearbox compatible with Horizon Hobby distributed Ultra Micro models (ParkZone, HobbyZone, and E-Flite)
    • OEM motor for ParkZone P-51, Sukhoi, and E-Flite T-28 Trojan
    • Ideal for aerobatic models weighing up to 1.3 oz and sport/scale models up to 2.5 oz
    • Suggested for many Stevens AeroModel ultra-micro model airplane kits
    • Compatible with EFL9051 propeller
     
     
    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3624
    15.99 USD
  • E-Flite - Ultra Micro Propeller 130mm x 70mm (2) [EFL9051/PKZ3601]

    Two Pack of Ultra Micro Propellers (with small foam spinner) 130mm x 70mm this propeller was designed for the E-Flite 4-Site and is same propeller used by the UM P-51 by ParkZone. Also recommended for the LiddleRod, PuddleBug, and S-POU! micro models by Stevens AeroModel.
    SA-EFL9051
    4.99 USD
  • Hyperion - CX G3 0130mAh 3.7V 25/45C LiPo [HP-LG325-0130-1S-UM]

    These are a major upgrade for Eflite, ParkZone Ultra Micro and Kyosho Minium series micro RC models, and fit either without modification. With Hyperion's G3 technology inside, they deliver more mA per gram than the stock batteries, while sustaining higher voltage under high loads, for greatly improved power performance. Of course, like all Hyperion G3 Lipo they last for hundreds of cycles, with consistant performance, when properly charged and stored.

    The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.
    HP-LG325-0130-1S-UM
    6.99 USD
  • ZAP - Zap-A-Gap CA+ Glue, 1/4 oz. [PAAPT04]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT04
    3.99 USD
  • ZAP - Flexi Tips (24 / pkg.) [PAAPT21]

    Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
    PAAPT21
    4.99 USD
  • Sanding Block Dual Grit 120/240

    This a great little item. Sanding block is made from very high density foam and features fine 240 and extrafine 120 grit papers. This block won't deform and cause waves in your project like those cheap hardware store sanding sponges.
    SA-TOOL/SB120240
    1.99 USD
  • AeroLITE (SOLITE) Antique/Cream White - PatchPak [SOLITE-XAW]

    AeroLITE (SOLITE) Antique White, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XAW
    5.49 USD
  • AeroLITE (SOLITE) Bright Red - PatchPak [SOLITE-XR]

    AeroLITE (SOLITE) Bright Red, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XR
    5.49 USD
  • Decal - 1911-1/2 Nieuport UM - ToonScale™

    CNC cut "Racing" Numbers and Toon Pilot are precision cut from premium 3 mil self-adhesive material. Includes two each toon pilot halves, wing numbers, along with right and left rudder markings; to complete the racing themed styling option for our ToonScale™ 1911-1/2 Nieuport UM, Laser-cut model airplane kit.

    DECAL-NIEUM
    8.99 USD

Customer feedback

Average customer rating:
 
(2 reviews)  



2 Most recent customer reviews (see all reviews):
Bob Lippman
Nov 30, 2016
Here's hoping that we see more spoked wheels like the ones on this Neuport. They really make the kit stand out from the crowd and give a fine scale appearance.
Eirik Magnesen
Apr 20, 2016
This customer purchased the item at our site.
Greetings from Norway, I started building modelaicrafts about 1951 and I just finished my second Stevens Aero kit the Niuport the first one was S-POU. I was Impressed with the first one but this second one I was more than impressed the instructions and quality of the kit. I recomend old modelbuilders like me to start building kits from StevensAero and be expirience what modern technics in lazer cutting and instructions can do to your happiness.

Send to Friend

Your name
Your email
Recipient's email
Add a personal message