StevensAero - Lil'SQuiRT V2 Electric RC Airplane, Indoor DiddleBug™ [SAK-LSQRTV2]

The Lil'SQuiRT™ V2 was derived from our SQuiRT™ S400 outdoor trainer. The Lil'SQuiRT™ features many of the design characteristics you loved about the SQuiRT™ wrapped in a gymnasium friendly package. The removable wing rubber-bands in place making it less likely to damage when crashed. The landing gear is mounted with a shock absorbing mount to smooth over those less-than-perfect landings. The large undercambered wing encourages slow flight so there is plenty of time for the new pilot to react!

Designed with the beginner in mind. The Lil'SQuiRT™ introduces the new hobbyist to working with balsa, covering, and control setup in a non-threatening manner. Beginners will appreciate this affordable design, simple single surface wing, low parts count, and self jigging fuselage that builds straight every time. The gentle handling Lil'SQuiRT™ will not spin and stalls are always clean, predictable, and straight ahead. Slow speed, wide flight envelope, and forgiving handling keeps the new pilot from trouble and the low mass, durable, all balsa construction makes encounters with the ground a non-event. Should you find your Lil'SQuiRT™ requires repair; damage is easily fixed at the field in seconds with thin CA glue.

Advanced pilots will enjoy relaxing low and close in flying encounters with their Lil'SQuiRT™ V2. The Lil'SQuiRT™ V2's retro old-timer design echoes fond memories of childhood free flight models. The clean lines, small size, and flight characteristics will garner all sorts of attention wherever you and your Lil'SQuiRT go!

Enter the world of RC Micro / Indoor flight with conventional electronics and radio gear. The high quality, affordable, RC system used in the Lil'SQuiRT is easily transported to more advanced models, micro and parkfliers, as your skills develop. Stevens AeroModel offers indoor/backyard pylon and aerobatic models that make extensive use of the Lil'SQuiRT's flight pack so you won't have to purchase your electronics all over again when you are ready to move on.

Kit includes full size rolled plans, push rods, landing gear, nylon spoked wheels, windscreen, and motor mount. See our list of suggested products for completing your Lil'SQuiRT™ at the bottom of this page.

Trexler #2 Tires as pictured on model above are sold separately.

Details


Catalog Number	SAK-LSQRTV2
Inventory Status	In stock
Shipping Weight	0.50 lbs
Buy Online:	$26.99

Options

Quantity

Add to cart

Add to wish list

Product comparison

Design Specifications

Recommended Flying Site	Gymnasium
Airframe Type	Basic Trainer
Control Layout	3 Channel R/E/T
Airframe Construction	Laser Engineered™ Balsa
Hardware Pack	Comprehensive
Product Origin	Colorado, USA
Wing Span (in.)	23.5
Wing Area (sq. in.)	105
Length (in.)	18
Flying Weight (oz.)	2.8
Loading (oz. / sq. ft.)	3.8
Wing Cube Loading	4.5
Power Rating (sug. motor)	6W (LPS-B2C-CS)
Propeller	GWS 7x6 SF
Speed Control (ESC)	Castle Pixie 7P
Battery	250 mAh (6C) 7.4V
Rudder Servo	BMS303
Elevator Servo	BMS303
Aileron Servo (1)	NA
Aileron Servo (2)	NA
Pilot Skil Level	Beginner
Builders Skill Level	Beginner

Suggested products

#18957

StevensAero - Lil'SQuiRT V2 Electric RC Airplane, Indoor DiddleBug™ [SAK-LSQRTV2]

This laser cut all balsa RC micro/indoor electric model airplane is based on our SQuiRT™ 400 simple trainer aircraft. Classic charm with simple build and easy handling - ideal for your first indoor RC model. The Lil'SQuiRT™ Makes use of conventional sub-micro radio gear.

Buy Online: $26.99

Amount:

#16428

GWS - Micro Indoor Power System LPS B2C-CS, Includes Spinner [GW/LPS-B2C-CS]

Micro indoor electric RC and free flight power system by GWS. CN12-B2C motor with 6.2:1 gear reduction box. 14.9g motor is ideal for our DiddleBug series of RC model airplane kits.

Buy Online: $13.19

Amount:

#16896

E-Flite - LPS-B2C Motor Heat Sink [EFLH1131]

This light weight Heat Sink is an ideal match to your LPS-B2C power system. Recomened to increase motor longevity ideal for use with our recommended DiddleBug, DiddleRod, and MudBug laser cut airplane kits. Also a good match for micro helicopter applications that use a motor driven tail like the Blade CP/PRO

Buy Online: $1.99

Amount:

#16166

GWS - 7 x 6 SF Propeller [GW/EP7060]

GWS - 7 x 6 SF Prop

Buy Online: $1.19

Amount:

#16358

GWS - Spinner 1/2in. for 2-3mm Shaft [GW/SPN002]

GWS - Spinner 1/2 in.(17mm)/2-3mm Shaft

Buy Online: $0.39

Amount:

#16938

GWS - Li-poly Speed Controller 50 JR [GWESC050A]

GWS - Li-poly Speed Controller 50 JR

Buy Online: $13.19

Amount:

#17523

Trexler - #02 Pneumatic Balloon Wheels, 1-5/8in. Diameter [TRX02]

Trexler - #02 Pneumatic Balloon Wheels, 1-5/8 in. Diameter

Buy Online: $18.00

Amount:

#17106

Blue Bird - BMS-303 Ultra Micro Servo [BMS-303]

Blue Bird - BMS-303 Ultra Micro Servo

Buy Online: $16.99

Amount:

#19915

ThunderPower RC - 0250mah 7.4V Pro Lite V2 (JST Connector) [THP2502SJPL2]

Huge performance in a tiny form factor. ThunderPower RC has once again set the bar a bit higher in the industry for small high performance LiPo batteries. Great form factor is ideal for many micro and indoor models.

Buy Online: $11.99

Amount:

Add Checked Items to Cart

Buy Together and Save

Customers Also Bought

Customers who bought this item also bought...

Trexler - #02 Pneumatic Balloon Wheels, 1-5/8in. Diameter [TRX02]

GWS - 7 x 6 SF Propeller [GW/EP7060]

GWS - Spinner 1/2in. for 2-3mm Shaft [GW/SPN002]

StevensAero - MudBug™ Electric RC Airplane, Indoor DiddleBug™ [SA-KIT-MUDBUG]

Downloads

Photo Supplement (804 KB)

Customer feedback

Reviews

Author: Ralph Tarrant (tarrant39@yahoo.com)
I saw this model fly at in a gymnasium. What a beautiful flyer! I'm going to buy one for myself and my grandkids.

Catalog

Articles

Manufacturers

Special

Customer Service

StevensAero - Lil'SQuiRT V2 Electric RC Airplane, Indoor DiddleBug™ [SAK-LSQRTV2]

Design Specifications

Suggested products

Buy Together and Save

Customers Also Bought

Downloads

Customer feedback

Your cart

User Account

News