StevensAero - LiddleGee™, Indoor/Backyard Ultra Micro Kit

Product rating
 
(2 reviews)  

Catalog Number
SAK-LGEE2.4
Shipping Weight
0.20 lbs
Product Origin
Made in Colorado, U.S.A
Wing Span (in.)
14.75
Wing Area (sq. in.)
57
Length (in.)
12.5
Flying Weight (oz.)
1.1
Loading (oz. / sq. ft.)
2.7
Wing Cube Loading
4.4
Control Layout
RET
Retail
50.00 USD
Buy Online
39.00 USD (Save 22%)
Quantity

  • Product Description
  • Related Products
  • Customer Reviews
  • Send to Friend
Based on the LiddleRod 2.4 the LiddleGee puts a fresh face on our smooth-flying highly aerobatic indoor model. With nimble handling and a wide flight envelope, the LiddleGee 2.4 is a convincing aerobat, yet features forgiving handling not common in similarly sized aerobatic models. Large round loops, rolls, snaps, stall turns, Immelman turns, split-s, and cuban eight maneuvers are well within the scope of this easy to fly three channel aerobat (Rudder Elevator Throttle).

Beginning builders will appreciate the simple assembly, innovative self jigging components, and low parts count of this high quality balsa kit. Durable construction makes unintended encounters with the ground a non-event and damage is easily fixed at the field in seconds with thin CA glue.

Designed to accept the popular ParkZone (PKZ3351) or 2.4ghz Spektrum DSM2 AR6400 Rec/ESC/Servo combo unit and PKZ3624 motor and gearbox.

Related Products

  • Ultra-Micro 3 Channel Receiver/ESC/Servo Combo [Replaces UA1151/PKZ3351]

    This OEM ParkZone PKZ3352/U1152 Ultra Micro Receiver/ESC/Servo "puck" is a factory replacement unit for the ParkZone Vapor, Ember 2, HobbyZone Champ and many other Ultra-Micro model aircraft distributed by Horizon Hobby.  The PKZ3352 is compatible with all ParkZone, E-Flite, HobbyZone, and Spektrum DSM2 compatible 2.4ghz transmitters.  This product will not fuction with Airtronics, Futaba, Hitec, or other non DSM2 compatible transmitter.

    The PKZ3352 weighs 3.3g and features an on-board receiver, electronic speed control (ESC), and servos mapped to Elevator (pitch) and Aileron (roll) transmitter channels. This configuration is Ideal for control of Rudder/Elevator three channel models. Two linear drive servos built atop a receiver/esc "puck" featuring a pre-soldered battery connector and motor plug.

    • Weight: 3.3g
    • Input Voltage: 3.7V (1S Lipo)
    • Compatible with PKZ3624 motor/gearbox

     

    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3352/U1152
    59.99 USD
  • Ultra-Micro Motor and Gearbox [PKZ3624]

    High performance ParkZone PKZ3624 coreless brushed motor mounted in gearbox compatible with Horizon Hobby distributed Ultra Micro models (ParkZone, HobbyZone, and E-Flite)
    • OEM motor for ParkZone P-51, Sukhoi, and E-Flite T-28 Trojan
    • Ideal for aerobatic models weighing up to 1.3 oz and sport/scale models up to 2.5 oz
    • Suggested for many Stevens AeroModel ultra-micro model airplane kits
    • Compatible with EFL9051 propeller
     
     
    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3624
    15.99 USD
  • E-Flite - Ultra Micro Propeller 130mm x 70mm (2) [EFL9051/PKZ3601]

    Two Pack of Ultra Micro Propellers (with small foam spinner) 130mm x 70mm this propeller was designed for the E-Flite 4-Site and is same propeller used by the UM P-51 by ParkZone. Also recommended for the LiddleRod, PuddleBug, and S-POU! micro models by Stevens AeroModel.
    SA-EFL9051
    4.99 USD
  • Hyperion - CX G3 0130mAh 3.7V 25/45C LiPo [HP-LG325-0130-1S-UM]

    These are a major upgrade for Eflite, ParkZone Ultra Micro and Kyosho Minium series micro RC models, and fit either without modification. With Hyperion's G3 technology inside, they deliver more mA per gram than the stock batteries, while sustaining higher voltage under high loads, for greatly improved power performance. Of course, like all Hyperion G3 Lipo they last for hundreds of cycles, with consistant performance, when properly charged and stored.

    The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.
    HP-LG325-0130-1S-UM
    6.99 USD
  • Du-Bro RC - Double Sided Tape Assortment (1/32 [DUB634]

    Du-Bro RC - Double Sided Tape Assortment (1/32
    DUB634
    2.39 USD
  • ZAP - CA Glue, 1/4 oz. [PAAPT10]

    ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.

    SUPERIOR PENETRATING FORMULA
    SUPER THIN - WATER LIKE CONSISTENCY
    BONDS AND CURES IN 1 TO 5 SECONDS
    WORKS ON MOST MATERIALS
    PAAPT10
    3.99 USD
  • ZAP - Zap-A-Gap CA+ Glue, 1/4 oz. [PAAPT04]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT04
    3.99 USD
  • ZAP - Flexi Tips (24 / pkg.) [PAAPT21]

    Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
    PAAPT21
    4.99 USD
  • Sanding Block Dual Grit 120/240

    This a great little item. Sanding block is made from very high density foam and features fine 240 and extrafine 120 grit papers. This block won't deform and cause waves in your project like those cheap hardware store sanding sponges.
    SA-TOOL/SB120240
    1.99 USD
  • AeroLITE (SOLITE) Bright White - PatchPak [SOLITE-XW]

    AeroLITE (SOLITE) Bright White, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XW
    5.49 USD
  • AeroLITE (SOLITE) Transparent Blue - PatchPak [SOLITE-XTRB]

    AeroLITE (SOLITE) Transparent Blue, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XTRB
    5.49 USD

Customer feedback

Average customer rating:
 
(2 reviews)  



2 Most recent customer reviews (see all reviews):
Thomas Todro
Jun 3, 2015
The LiddleGee is a fantastic model to both build and fly! The laser cutting is superb. The parts are easily identified, and the instruction manual is very clear, concise and very easy to follow As with all kits just take your time, avoid rushing, relish the model coming together under your direction. Savoure the build! This airplane will fly at all throttle settings, it looks fantastic cruising around of ARF's, that because of their weight need to zip around like jet. The LiddleGee cruises slowly but responsively between 1/3 and 1/2 throttle, and looks great going it. Last night a full 60 minutes, lots of battery changes... I received major compliments on the really cool looks and great flight performance. Don't hesitate, order one now, better get two or three, these are really easy to get hooked on!!!!! Trust me I several new in the box, that I am dying to start to build.
Dale
Dec 7, 2013
I found this to be a brilliant little kit. I got a huge satisfaction building this plane, in less then a week of evenings working slow. I found using a magnifier, tweezers on certain things, and definately toothpicks for applying glue make for very clean applications. Its a great value in a small package. I've built alot of planes, big and small, this one is knocked out of the park though.. I've already got another power plant, and brick for the next plane, and have my eye on the kit, and I'm looking forward to the next SA kit. I haven't yet flown my LiddleGee, I'm going to wait for spring thaw, but by the way the motor pulls, it should be a little rocket... and it looks incredible on my bookshelf. You can't go wrong with these planes.... a great bang for the buck these days.

Send to Friend

Your name
Your email
Recipient's email
Add a personal message