December 8th - 18th ONLY, SAVE 10% SITE WIDE
Place your order on or before December 18th and we'll do our best to ensure your order arrives before December 25th. Don't wait too long as we cannot ensure Christmas delivery for any orders placed after the 18th.
| Enter the world of Micro / Indoor flight with a precision laser cut micro/indoor model airplane by Stevens AeroModel.
Beginners will appreciate this affordable design, simple single surface wing, low parts count, and self jigging fuselage that builds straight every time. The gentle handling LiddleBug will not spin and stalls are always clean, predictable, and straight ahead. Slow speed, wide flight envelope, and forgiving handling keeps the new pilot from trouble and the low mass, durable, all balsa construction makes encounters with the ground a non-event. Should you find your LiddleBug requires repair; damage is easily fixed at the field in seconds with thin CA glue.
Advanced pilots will enjoy relaxing low and close in flying encounters with their LiddleBug. The LiddleBug's retro old-timer design echoes fond memories of childhood free flight models. The clean lines, small size, and flight characteristics will garner all sorts of attention wherever you and your Bug go!
Desiged to accept the popular ParkZone (PKZ3351) 2.4ghz Spektrum DSM2 Rec/ESC/Servo combo unit.
This OEM ParkZone PKZ3352/U1152 Ultra Micro Receiver/ESC/Servo "puck" is a factory replacement unit for the ParkZone Vapor, Ember 2, HobbyZone Champ and many other Ultra-Micro model aircraft distributed by Horizon Hobby. The PKZ3352 is compatible with all ParkZone, E-Flite, HobbyZone, and Spektrum DSM2 compatible 2.4ghz transmitters. This product will not fuction with Airtronics, Futaba, Hitec, or other non DSM2 compatible transmitter.
The PKZ3352 weighs 3.3g and features an on-board receiver, electronic speed control (ESC), and servos mapped to Elevator (pitch) and Aileron (roll) transmitter channels. This configuration is Ideal for control of Rudder/Elevator three channel models. Two linear drive servos built atop a receiver/esc "puck" featuring a pre-soldered battery connector and motor plug.
|Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)|