Search: Advanced search
 

Catalog


Articles

Special

Customer Service

Stevens AeroModel :: Model Airplane Kits :: ToonSCALE™ :: StevensAero - FREDe™ 2X (1100) Electric Slow Flyer, Laser Cut Kit

StevensAero - FREDe™ 2X (1100) Electric Slow Flyer, Laser Cut Kit

StevensAero - FREDe™ 2X (1100) Electric Slow Flyer, Laser Cut Kit
Stevens AeroModel presents the FREDe (2X) Twice the fun of our original FREDe parkflyer.   With 1050 square inches of thick under-cambered wing, a svelte 72 oz flying weight, and 120W/lb power loading; experience GIANT SCALE SLOWFLYING as it was meant to be.

Background:

FREDe™ is a ToonSCALE™ version of Eric Clutton's F.R.E.D. (Functional Runabout Experimental Design) FREDe's airframe frames quickly thanks to precision laser cut components and simple yet thoughtful engineering. This rugged design features our shock mounted landing gear system and soaks up all the bumps and bruises a beginner can deliver. FREDe™ dishes out stable predictable performance with pro pleasing "fun" on tap allowing for all rudder, elevator, throttle aerobatics including flat and falling leaf flat spins! FREDe™ - because flying should be FUN!

Kit Includes:
  • Push-Rods and Control Linkages.
  • Pre-Bent landing gear
  • Spruce Landing Gear Block
  • Step by Step Photo Illustrated Instructions
  • Leading edge, turbulator, and spar wood stock in full 48 in. lengths
  • Limited edition Kris Cartwright FREDe pilot figure
  • Cockpit Combing and Interior.
Kit Requires:

#11-G Trexler Balloon Wheels or 4-1/2in. Foam Wheels

Suggested Electronics:
Motor - E-Flite Power 32 (EFLM4032A)
Propeller - 15x8 APC E
Battery - 3S 11.1V 3300-4200 LiPo (Hyperion - 3S 11.1V 3300)
ESC - High Quality 50-60A ESC (Castle Creations Thunderbird 54)
SERVOS - 2 Standard Servos (Hitec HS322HD)

Suggested Finishing Items:
3-4 Rolls AeroFILM covering
Sanding Bar with 250, 400, and 600 grit paper
Sharp Hobby Knife with #11 blades
Razor plane
5 or 30 Min Epoxy
1 oz of Thick, Medium, and Thin CA glues
Balsa Filler

  18%

Details
 
Catalog Number SAK-FREDE2X
Inventory Status In stock
Shipping Weight 5.00 lbs
Retail: $359.00
Buy Online: $295.00 Your Savings 18%

Options
 
Quantity

Add to cart
        
Add to wish list

Product comparison 



Design Specifications

 
Recommended Flying Site Soccer Field
Club Field
Airframe Type Basic Trainer
Sport
Control Layout 3 Channel R/E/T
Airframe Construction Laser Engineered™ Balsa
Product Origin Colorado, USA
Wing Span (in.) 55
Wing Area (sq. in.) 1050
Length (in.) 46
Flying Weight (oz.) 72
Loading (oz. / sq. ft.) 9.8
Wing Cube Loading 3.6
Power Rating (sug. motor) 600W (Power 32)
Propeller APC 15x8 E
Speed Control (ESC) Castle Thunderbird 54
Battery 2500 mAh (25C) 11.1V
Rudder Servo HS-322HD
Elevator Servo HS-322HD
Aileron Servo (1) NA
Aileron Servo (2) NA
Pilot Skil Level Beginner
Builders Skill Level Beginner
 

Suggested products

#20208
StevensAero - FREDe™ 2X (1100) Electric Slow Flyer, Laser Cut Kit

 1050 square in. MONSTER slow flyer. Kit includes push-rods, control linkage, servo horns, and pre-bent landing gear. Trexler #11 wheels may be purchased separately. 72 oz flying weight, and 120W/lb power loading experience GIANT SCALE SLOWFLYING as it was meant to be.
THIS PURCHASE QUALIFIES FOR FREE DOMESTIC SHIPPING!

 Buy Online: $295.00
Amount: 

#17531
Trexler - #11 Pneumatic Balloon Wheels, 4-1/2in. Diameter [TRX11-G]

 Trexler - #11 Pneumatic Balloon Wheels, 4-1/2 in. Diameter

 Buy Online: $44.00
Amount: 

#20509
Big Lite Wheels 4.50 in. - Treaded Foam [DAV5745]

 4.50 in. Treaded foam Big Lite wheels by Dave Brown Products. Made in USA!

 Buy Online: $13.99
Amount: 

#18994
Castle Creations - Thunderbird 54 Brushless Electric Speed Control ESC [CSETB54]

 Castle Creations - Thunderbird 54 Brushless Speed Control

 Buy Online: $50.99
Amount: 

#17505
APC - 15x8E Thin Electric Propeller [APC15080E]

 High quality glass filled nylon propeller for higher powered electric RC model aircraft from the industry leader in model airplane propellers. Multiple hub adapters included to fit a variety of shaft diameters.

 Buy Online: $9.79
Amount: 

#20006
Hyperion - CX G3 3300mAh 11.1V LiPo Power Pack [HP-LG325-3300-3S]

 Hyperion Generation 3 Lithium Polymer Packs are revolutionary in both performance and value. Compared to an average of the batteries on market last year, Hyperion G3 cells provide up to up to 4x more cycles under the same discharge conditions. Hyperion G3 LiPo's can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes. The G3 packs are made with a new Hybrid RS construction technology, super-fine substrate materials, rigorous ISO 9001 Quality Control, and final cell matching process, which all guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.

 Buy Online: $64.99
Amount: 

#20506
Hitec - HS322HD Standard Heavy Duty Servo JR/RCD/Z Plug [HRC33322S]

 The HS-322HD Standard Heavy Duty Servo utilizes Hitec’s revolutionary Karbonite™ gear train which is four times stronger than our standard white nylon gears, and even after hundreds of thousands of cycles they don’t show any signs of wear. Karbonite™ gears and our custom IC make the HS-322HD a great choice for an economical sport servo.

 Buy Online: $15.99
Amount: 

#19791
ZAP - CA Glue, 1 oz. [PAAPT08]

 ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.

 Buy Online: $7.99
Amount: 

#19788
ZAP - Zap-A-Gap CA+ Glue, 1 oz. [PAAPT02]

 ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

 Buy Online: $7.99
Amount: 

#19797
ZAP - Slo Zap CA Glue, 1oz. [PAAPT20]

 SLO ZAP CA Is called a thick formula. The thicker the formula, the slower the cure time, that’s why we call it SLO ZAP. Although it is thick it is still a liquid and will flow. Penetration into porous materials is very minimal. SLO ZAP is an excellent gap filler and provides extra time when positioning wood parts. In modeling its ideal for laminating wood parts and forming fillets. Because its thick, it will not run, it forms a very clean even fillet around all types of joints. The high cured strength means it works great on higher stress areas.

 Buy Online: $7.99
Amount: 

#19988
Hobbylite Micro-Fill - Balsa Colored Filler [HCAR3401]

 High quality balsa colored wood filler. A personal favorite of this builder! This ready to use filler is the lightest we've come across, it sands easily, and is foil sealed to ensure that the product is fresh when it reaches your door.

 Buy Online: $6.99
Amount: 

Add Checked Items to Cart 

Your cart

User Account


News

Site news and special offers available only by subscription.

Your email:
Subscribe 
The finest laser cut model airplane kits and electric RC parkflyers since 2003. Copyright © 2003-2012 Stevens AeroModel
SSL