Stevens AeroModel will be closed November 20th - 30th. All orders placed while we are closed will be held to ship when we open on December 1st.  Happy Thanksgiving!

more details

StevensAero - FREDe™ 2X (1100), ToonScale™ Electric Sport Model

Product rating
 
(0 reviews)  

Catalog Number
SAK-FREDE2X
Shipping Weight
5.00 lbs
Product Origin
Made in Colorado, U.S.A
Wing Span (in.)
55
Wing Area (sq. in.)
1050
Length (in.)
46
Flying Weight (oz.)
72
Loading (oz. / sq. ft.)
9.8
Wing Cube Loading
3.6
Control Layout
REAAT
Buy Online
349.00 USD
Quantity

  • Product Description
  • Related Products
  • Customer Reviews
  • Send to Friend

Stevens AeroModel presents the FREDe (2X) Twice the fun of our original FREDe parkflyer.   With 1050 square inches of thick under-cambered wing, a svelte 72 oz flying weight, and 120W/lb power loading; experience GIANT SCALE SLOWFLYING as it was meant to be.

Background:

FREDe™ is a ToonSCALE™ version of Eric Clutton's F.R.E.D. (Functional Runabout Experimental Design) FREDe's airframe frames quickly thanks to precision laser cut components and simple yet thoughtful engineering. This rugged design features our shock mounted landing gear system and soaks up all the bumps and bruises a beginner can deliver. FREDe™ dishes out stable predictable performance with pro pleasing "fun" on tap allowing for all rudder, elevator, throttle aerobatics including flat and falling leaf flat spins! FREDe™ - because flying should be FUN!

Kit Includes:

  • Push-Rods and Control Linkages.
  • Pre-bent landing gear
  • 4 1/2 in. foam main wheels
  • 1 3/4 in. foam tail wheel
  • Spruce landing gear block
  • Step by Step Photo Illustrated Build Instructions
  • Leading edge, turbulator, and spar wood stock in full 48 in. lengths
  • Limited edition Kris Cartwright FREDe pilot figure
  • Cockpit Combing and Interior.

Optional Balloon Wheels:

#11-G Trexler Balloon Wheels

Suggested Electronics:
Motor - E-Flite Power 32 (EFLM4032A)
Propeller - 15x8 APC E
Battery - 3S 11.1V 3300-4200 LiPo (Hyperion - 3S 11.1V 3300)
ESC - High Quality 50-60A ESC (Castle Creations Thunderbird 54)
SERVOS - 2 Standard Servos (Hitec HS322HD)

Suggested Finishing Items:
3-4 Rolls AeroFILM covering
Sanding Bar with 250, 400, and 600 grit paper
Sharp Hobby Knife with #11 blades
Razor plane
5 or 30 Min Epoxy
1 oz of Thick, Medium, and Thin CA glues
Balsa Filler

Every FREDe 2X is carefully cut-to-order please allow 5-7 business days before shipment of this product.

Related Products

  • Trexler - #11 Pneumatic Balloon Wheels, Pair [TRX11-G]

    Description:

    Trexler size 11G pneumatic latex balloon wheels.  Heavier gauge rubber than sizes 1-6.  Product Inflates to 4-1/2 in. diameter, sold in pairs, and is suitable for larger gas and electric models with a maximum airframe weight of 15 lbs.  Made right here in U.S.A. just like they always have been!

    Trexler do's and don'ts:

    DO NOT -  Inflate using your mounth.  Moisture from your lungs/mouth will cause the valve stem to seal rendering the product useless.

    DO NOT -  Leave inflated while in storage, again the valve stem may seal due to moisture within the tire.

    DO NOT - Over-inflate tire with pump as tire will rupture or blister.  Trexler wheels (#1-#6) are best inflated using a glue syringe.

    DO NOT - Disount tire from wooden hub as you might damage or puncture the tire.

    DO NOT - Use on models heavier than specified by Trexler.

    DO - Store in a cool, dry, dark place.

    DO - Inflate tires prior to use using the Trexler inflator or large capacity syringe.

    DO - Deflate tire after each flying session and leave the valve stems open.

    DO - Adhere to the suggested carrying capacity of the tires when sizing to fit your model.

     

     

    TRX11-G
    44.00 USD
  • Hyperion - CX G3 3300mAh 11.1V LiPo Power Pack [HP-LG325-3300-3S]

    Hyperion Generation 3 Lithium Polymer Packs are revolutionary in both performance and value. Compared to an average of the batteries on market last year, Hyperion G3 cells provide up to up to 4x more cycles under the same discharge conditions. Hyperion G3 LiPo's can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes. The G3 packs are made with a new Hybrid RS construction technology, super-fine substrate materials, rigorous ISO 9001 Quality Control, and final cell matching process, which all guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.
    HP-LG325-3300-3S
    64.99 USD
  • Hitec - HS322HD Standard Heavy Duty Servo JR/RCD/Z Plug [HRC33322S]

    The HS-322HD Standard Heavy Duty Servo utilizes Hitec’s revolutionary Karbonite™ gear train which is four times stronger than our standard white nylon gears, and even after hundreds of thousands of cycles they don’t show any signs of wear. Karbonite™ gears and our custom IC make the HS-322HD a great choice for an economical sport servo.

    *See Karbonite guidelines below

    Features

    Applications: Heli's and Aircraft up to 72” or up to 12lbs when using just one servo per control surface.

    Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications, even if under 12lbs.

    Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.

    Specifications:

    Motor Type: 3 Pole
    Bearing Type: Nylon
    Speed (4.8V/6.0V): 0.19 / 0.15 sec @ 60 deg.
    Torque oz./in. (4.8V/6.0V): 42 / 51
    Torque kg./cm. (4.8V/6.0V): 3.0 / 3.7
    Size in Inches: 1.57 x 0.78 x 1.43
    Size in Millimeters: 39.88 x 19.81 x 36.32
    Weight ounces: 1.51
    Weight grams: 42.81
    HRC33322S
    15.99 USD
  • ZAP - CA Glue, 1 oz. [PAAPT08]

    ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.

    SUPERIOR PENETRATING FORMULA
    SUPER THIN - WATER LIKE CONSISTENCY
    BONDS AND CURES IN 1 TO 5 SECONDS
    WORKS ON MOST MATERIALS
    PAAPT08
    7.99 USD
  • ZAP - Zap-A-Gap CA+ Glue, 1 oz. [PAAPT02]

    ZAP - Zap-A-Gap CA+, 1 oz. [PAAPT02]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT02
    7.99 USD
  • ZAP - Slo Zap CA Glue, 1oz. [PAAPT20]

    SLO ZAP CA Is called a thick formula. The thicker the formula, the slower the cure time, that’s why we call it SLO ZAP. Although it is thick it is still a liquid and will flow. Penetration into porous materials is very minimal. SLO ZAP is an excellent gap filler and provides extra time when positioning wood parts. In modeling its ideal for laminating wood parts and forming fillets. Because its thick, it will not run, it forms a very clean even fillet around all types of joints. The high cured strength means it works great on higher stress areas.

    VERY HIGH VISCOSITY FORMULA
    SUPER THICK AND SUPER STRONG
    ALLOWS PART POSITIONING FOR APPROXIMATELY 30 TO 40 SECONDS
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT20
    7.99 USD

Customer feedback

There have been no reviews


Send to Friend

Your name
Your email
Recipient's email
Add a personal message