AMA Expo Show Special.. Today Only!

SAVE 20% on Stevens AeroModel Brand Kits

(add the product to your shopping cart to apply the savings)

Come visit us this weekend at the AMA Expo East - Booth 432 

Please note: Stevens AeroModel will be closed 2/20-2/27/2018 to attend the AMA Expo East in Secaucus, NJ.  Orders placed while we are closed will be held to ship when we re-open on 2/28.  Orders over $150.00 will receive free domestic shipping while we are closed.  Can't join us at the show? Watch this space!  Show specials will be made available online as well!

more details

StevensAero - BuzzBomb (100) "Toon Buzzard" Micro Flyer

Product rating
 
(3 reviews)  

Catalog Number
SAK-BUZZ100
Shipping Weight
0.60 lbs
Product Origin
Made in Colorado, U.S.A
Wing Span (in.)
21
Wing Area (sq. in.)
100
Length (in.)
16
Flying Weight (oz.)
1.8
Loading (oz. / sq. ft.)
2.6
Wing Cube Loading
3.1
Control Layout
RET
Buy Online
55.00 USD
Quantity

  • Product Description
  • Related Products
  • Customer Reviews
  • Send to Friend
The Stevens AeroModel BuzzBomb 100 is a reduced version of our contemporary twist on the vintage free-flight classic Buzzard Bombshell and, while it echoes the lines of the championship wining predecessor, the construction, styling, and flight control is refreshingly modern. The BuzzBomb 100 is slow enough to be flown indoors yet equally a delight to pilot in the cul-de-sac on dawn patrol. Our beginner friendly airframe assembles in a matter of hours, and the simple attractive lines are a breeze to cover. The BuzzBomb 100 has been designed to readily accept the abundant and affordable ParkZone Ultra-Micro indoor electronics. The electronic components may be purchased as part of a package direct from StevensAero.com or simply recycle the electronics from your broken Ultra- Micro foamie into this attractive, capable, balsa model that’s uniquely yours!

The Build:

Designed and manufactured in the USA using industry leading construction methods and innovative laser cutting techniques, Stevens AeroModel hand selects only the highest quality AAA balsa and hard woods from select state-side mills. To ensure builder success the thoughtful design and materials selection is backed by a thorough step-by-step instruction set, clear drawings, downloadable photo supplement, and comprehensive top-shelf hardware package. StevensAero.com cordially invites you to experience the satisfaction and improved flight performance that is only achieved through building your very own Buzz 100.


Kit includes:
Step-by-step assembly manual.
100% laser cut balsa and hardwood parts from AAA hand selected wood.
Laser Cut Acetate Windscreen.
Designed for popular micro electronics (PKZ3351 or SPMAR6400)
Hardware including push-rods, control horns, rubber bands, and tail skid.

Kit requires:
1 - Du-Bro RC 1-1/2 in. Micro Lite Wheels (or equivalent).
1 - ParkZone or Spektrum Ultra-Micro Receiver/ESC/Servo unit [PKZ3351 or SPMAR6400]
1 - Spektrum DSM2 compatible transmitter
1 - ParkZone Motor and Gearbox PKZ3624
1 - E-Flite EFLM9051 Propeller
1 - 130-160 mAh 3.7V LiPo Battery

Sanding Block, Thin and Medium CA glue, and 1 Roll or 3 Patch Packs of AeroLITE film.

Related Products

  • Du-Bro RC - 1.50 in. Mini Lite Wheels (2) [DUB150MW]

    Key Features:

    2 per package
    Light weight design
    2.14 gr. per wheel

    Overview:

    Ideal for indoor and park flyers. Du-Bro RC Mini Lite Wheels are lightweight and features a 2 piece press together hub and a super light foam tire. Comes standard with .047 axle hole and can be drilled out for larger diameter axles.

    These Mini Lite Wheels are sure to give your airplane that scale look.
    DUB150MW
    4.79 USD
  • Ultra-Micro Motor and Gearbox [PKZ3624]

    High performance ParkZone PKZ3624 coreless brushed motor mounted in gearbox compatible with Horizon Hobby distributed Ultra Micro models (ParkZone, HobbyZone, and E-Flite)
    • OEM motor for ParkZone P-51, Sukhoi, and E-Flite T-28 Trojan
    • Ideal for aerobatic models weighing up to 1.3 oz and sport/scale models up to 2.5 oz
    • Suggested for many Stevens AeroModel ultra-micro model airplane kits
    • Compatible with EFL9051 propeller
     
     
    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3624
    15.99 USD
  • Ultra Micro Propeller 130mm x 70mm (2/pkg) [EFL9051/PKZ3601/HBZ4401]

    Ultra Micro Propeller (2/pkg) - 130mm x 70mm. This propeller was designed for the E-Flite 4-Site and is same propeller used by the UM P-51 by ParkZone. Also recommended for all micro models by Stevens AeroModel that utilize the PKZ3624 Motor and Gearbox. Package includes one 130mm x 70mm propeller with foam rubber spinner.

    (Note: propeller is installed by threading onto the output shaft of the pKZ3624 gearbox.)

    Part replaces EFL9051, PKZ3601, and HBZ4401

    SA-EFL9051
    4.99 USD
  • Ultra-Micro 3 Channel Receiver/ESC/Servo Combo [Replaces UA1151/PKZ3351]

    This OEM ParkZone PKZ3352/U1152 Ultra Micro Receiver/ESC/Servo "puck" is a factory replacement unit for the ParkZone Vapor, Ember 2, HobbyZone Champ and many other Ultra-Micro model aircraft distributed by Horizon Hobby.  The PKZ3352 is compatible with all ParkZone, E-Flite, HobbyZone, and Spektrum DSM2 compatible 2.4ghz transmitters.  This product will not fuction with Airtronics, Futaba, Hitec, or other non DSM2 compatible transmitter.

    The PKZ3352 weighs 3.3g and features an on-board receiver, electronic speed control (ESC), and servos mapped to Elevator (pitch) and Aileron (roll) transmitter channels. This configuration is Ideal for control of Rudder/Elevator three channel models. Two linear drive servos built atop a receiver/esc "puck" featuring a pre-soldered battery connector and motor plug.

    • Weight: 3.3g
    • Input Voltage: 3.7V (1S Lipo)
    • Compatible with PKZ3624 motor/gearbox

     

    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3352/U1152
    59.99 USD
  • Hyperion - CX G5 0160mAh 3.7V Ultra Micro LiPo 50C Max

    Hyperion G5 1S 3.7V (4.2V-Max) LiPo w/Ultra Micro Connector. We've had great results with this Hyperion Ultra Micro battery pack – compatible with all E-Flite, ParkZone, Spektrum, and HobbyZone ultra micro models requiring a 1S 3.7V battery. This is our go-to battery pack for the majority of our Stevens AeroModel micro aircraft.
    HP-G550-0160S1UM
    9.99 USD
  • ZAP - CA Glue, 1/4 oz. [PAAPT10]

    ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.

    SUPERIOR PENETRATING FORMULA
    SUPER THIN - WATER LIKE CONSISTENCY
    BONDS AND CURES IN 1 TO 5 SECONDS
    WORKS ON MOST MATERIALS
    PAAPT10
    3.99 USD
  • ZAP - Zap-A-Gap CA+ Glue, 1/4 oz. [PAAPT04]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT04
    3.99 USD
  • ZAP - Flexi Tips (24 / pkg.) [PAAPT21]

    Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
    PAAPT21
    4.99 USD
  • Sanding Block Dual Grit 120/240

    This a great little item. Sanding block is made from very high density foam and features fine 240 and extrafine 120 grit papers. This block won't deform and cause waves in your project like those cheap hardware store sanding sponges.
    SA-TOOL/SB120240
    1.99 USD
  • AeroLITE (SOLITE) White, Antique - 2M Roll [SOLITE-AW]

    AeroLITE (SOLITE) Antique White, 78 in. x 27.5 in. (2000mm x 700mm). 2M Roll for larger projects. Ultra light iron-on self-adhesive film (polypropylene) for electric park flyers, indoor, and micro model aircraft. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    SOLITE-AW
    19.99 USD
  • AeroLITE (SOLITE) Red, Bright - PatchPak [SOLITE-XR]

    AeroLITE (SOLITE) Bright Red, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XR
    7.99 USD
  • Replacement Parts by the Sheet for Stevens AeroModel Kits

    Ordering Instructions: 1) Prior to adding this item to your cart fill in the form below titled "Enter Kit and Sheet Number" with the model airplane kit and desired sheet number you wish to re-order. (Every Stevens AeroModel kit has the sheet number or sheet ID engraved on the cut sheet and/or listed in your product manual.) 2) Order one unit of this product per full laser cut sheet required. Thus, if you need to order multiple sheets or multiple copies of a single sheet, the order quantity of this item must match your requested sheet count. 3) Please be aware that this item is cut to order and will add 3-5 business days to the processing of your order.

    SAP-CUTSHEET
    6.00 USD

Customer feedback

Average customer rating:
 
(3 reviews)  



3 Most recent customer reviews (see all reviews):
Kris Forward
Nov 26, 2016
This airplane is an absolute joy, I built mine about 3 years ago, and have flown it countless times, crashed into trees, even lost it in the woods for a few weeks. It is still in pristine condition. You can climb almost vertically to almost out of sight, then cut the motor and glide for minutes. Also a great trainer. Fun to build too. I highly reccomend the Buzzbomb100. Im on my 4th Stevens kit now.....
Armond Saidai
Feb 2, 2014
My first Stevens Aero model. Great built, but very delicate.
I have only flown it out doors with some wind, it flies great.
I loved building it, love flying it and it won't be my last.
Phil Blake (cactusfun@msn.com)
An absolute delight to build. This is my first Steven;s kit but not my last. I can fly the buzzbomb 100 in my backyard during calm conditions.

Send to Friend

Your name
Your email
Recipient's email
Add a personal message