Mini Hotliner performance with affordable GWS EDP-50XC and 12mm Brushless systems. Features a wide flight envelope and forgiving stall characteristics - will slow to a crawl, climb out to a dot in seconds, and reaches blistering speeds in a shallow dive. See the online build thread CLICK HERE.
Ideal club racing platform.
Cuts through high winds that sends all other pilots packing.
Durable solid balsa and carbon construction.
Simple one evening construction from building board to first flight.
Outstanding performance from simple brushed 180 motors (40mph Level Flight)
Blistering performance from the Hacker E10-36L 12mm Brushless (60+mph Level Flight)
To complete this model you will require basic woodworking tools (a sanding block and sand paper), thin CA glue, clear tape, a water based urethane wood sealant or dope. Designed for JR SM8 servos.
The Hacker E10 Series Motors are designed for small EDF, Pylon, and slow flyer type aircraft. They also fit into many 1/36th scale micro trucks. These 12mm motors are desgned with efficient Neo Magnets, High-Temp Windings, and High-Quality Ball Bearings.
Auto-detects 2 or 3 cell Li-Poly pack and adjusts cut-off voltage
Beeps number of cells at startup
Auto-learns throttle range
1A BEC - supports 3 servos
Flexible silicone wire
Special Instructions: Never exceed the recommended battery voltage listed on the package. Do not use a separate battery supply with this controller. Never disconnect the battery supply when the motor is running.
ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.
SUPERIOR GAP FILLING FORMULA
MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
AVERAGE OF 20 SECONDS FOR CURING
WORKS ON OILY SURFACES
USE ZIP KICKER TO ACCELERATE CURE TIME
Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
This a great little item. Sanding block is made from very high density foam and features fine 240 and extrafine 120 grit papers. This block won't deform and cause waves in your project like those cheap hardware store sanding sponges.
Greetings all, I wanted to tell you all that we really like the A.R. My firend built his very similar to the stated design with a 5800 KVA inrunner. I put a small 2100 kva outrunner on mine that turns a 5x3 prop. They seem to have just about the same amout of speed and authority. Fantastic design and really fun to fly.
I'm the friend Randy mentioned. I first bought the AR as a home for an unused GWS brushed motor that came out of my Pico Stik. It flew great on that motor, but I wanted to see what it could do with a brushless. I bought a Feigao 1208425L, running a 450mAh 7.4 lipo, a 6 amp speed controller, and either a GWS 3x2 or 3x3 prop. It's an absolute blast to fly. Above combination seems perfectly matched, and I get about 4 minutes of pure fun.
I don't now Randy or Frank but I love this plane. Setup w/ Medusa 5300kva, tbird 9, 11.1v 700mah lipo, GWS 3*3, I'm not sure if I'm hitting 85mph, but it's rock solid and really fast. Sounds like a turbocharged mosquito buzzing the field! Now I just need to get braver and keep it on the deck.
Great little plane, and fun to build for me who has only built foamies and ARF's. My setup is a Turnigy 1230 4500 kv motor with 3x2 prop, 6A esc , HXT500 servos and 3 cell Nano 450. Setup worked great, allthough I didnt break any speed records with it.
I bought a SHAFT 400 and had a great time building it. Flying it for about a year… Lots of fun. Great plane. Love it!
— Fred Carrigan
Wow! Great service. I got the part today. Thank You!
— Ira Meltzer
I just built the BuzzBomb 400 and test flew it. Building it was really enjoyable because of the precisely cut parts and detailed instructions. The plane flew just as you said it would. It floats through the air with the greatest of ease and will b...
— Mark U.
The instructions and kit quality are excellent and as a complete novice builder I had no trouble following them and completing the build.
— Ross Brown
I finished building the Fly Baby, only thing I need is the radio block. This was another enjoyable kit to build, ...and am thinking about picking up another kit to start on. Good job guys, keep up the good work.
— Tony Scavello
I just finished putting toghter the se5.a. this was a very enjoyable kit, i've hardly ever had so much fun with anyother kit.
— TONY SCAVELLO
I have to say that the MBP program is one of the best hobby investments I have made.
I recently purchased the pond flyer ... this has to be the best wood kit we have ever assembled...
— Andy Langam
I recently aquired the FREDe2X kit and have just finished building it. It was an excelent and well enginered kit and I really enjoyed building it.
— Jim Brooks
Just finished my LiddleGee. What an impressive micro plane. I've built alot of planes, big and small, but I got more satisfaction from this kit in a week of evenings then I've had in years. Excellent design, excellent quality, quite a nice surpri...