AMA Expo Show Special.. Today Only!

SAVE 20% on Stevens AeroModel Brand Kits

(add the product to your shopping cart to apply the savings)

Come visit us this weekend at the AMA Expo East - Booth 432 

Please note: Stevens AeroModel will be closed 2/20-2/27/2018 to attend the AMA Expo East in Secaucus, NJ.  Orders placed while we are closed will be held to ship when we re-open on 2/28.  Orders over $150.00 will receive free domestic shipping while we are closed.  Can't join us at the show? Watch this space!  Show specials will be made available online as well!

more details

StevensAero - 1928 Pietenpol Air Camper (100), Indoor/Backyard Scale Kit

Product rating
 
(1 reviews)  

Catalog Number
SAK-AIRCAMP100
Shipping Weight
0.51 lbs
Product Origin
Made in Colorado, U.S.A
Wing Span (in.)
23.75
Wing Area (sq. in.)
100
Length (in.)
15.25
Flying Weight (oz.)
2.1
Loading (oz. / sq. ft.)
3
Wing Cube Loading
3.6
Control Layout
RET
Buy Online
79.00 USD
Quantity

  • Product Description
  • Related Products
  • Customer Reviews
  • Send to Friend

Take to the sky with this vintage homebuilt American classic. Designed by Bernard Pietenpol the 1928 Air Camper was an easy build and exceptional flyer for the homebuilder with modest woodworking skills. Bernard originally published his plans for the Air Camper in the "Flying and Glider" Manual of 1932-33. Our 1928 Pietenpol Air Camper features simple three channel control (RET) and has been engineered to readily accept ParkZone and E-Flite Ultra Micro DSM2 electronics. In addition to the nicest laser cut part set on the market, this kit includes a full hardware complement consisting of: Wheels, Windscreen, Faux Model A Motor, Radiator, Flying Struts, and profile pilot figures. Quick building interlocking laser cut construction increases build accuracy and reduces time spent on the building board. Perfectly suited for calm outdoor dawn/dusk patrol sorties and smaller indoor venues. Kit Includes: Precision laser cut balsa and hardwood parts Profile Pilot Figures Faux Model A Motor with Radiator Detail Pre-cut Acetate Windscreens Flying Struts Wheels Full size plan set Text instructions with downloadable photo supplement Comprehensive hardware package including wheels, pushrods, tail skid, and flying struts. Kit Requires: 1/4 oz. Thin and Medium CA glues Sanding Block with 220 grit paper AeroLITE covering film Minimum of 3 PatchPak Required (1 Red and 2 Silver featured on this model) ParkZone PKZ3351 or PKZUA1151 Receiver/ESC/Servo unit ParkZone PKZ3624 Motor and Gearbox 130mm x 70mm Propeller EFL9051 or PKZ3601 DSM2 Compatible Spektrum, ParkZone, or E-Flite Radio

Related Products

  • Ultra Micro Propeller 130mm x 70mm (2/pkg) [EFL9051/PKZ3601/HBZ4401]

    Ultra Micro Propeller (2/pkg) - 130mm x 70mm. This propeller was designed for the E-Flite 4-Site and is same propeller used by the UM P-51 by ParkZone. Also recommended for all micro models by Stevens AeroModel that utilize the PKZ3624 Motor and Gearbox. Package includes one 130mm x 70mm propeller with foam rubber spinner.

    (Note: propeller is installed by threading onto the output shaft of the pKZ3624 gearbox.)

    Part replaces EFL9051, PKZ3601, and HBZ4401

    SA-EFL9051
    4.99 USD
  • Ultra-Micro Motor and Gearbox [PKZ3624]

    High performance ParkZone PKZ3624 coreless brushed motor mounted in gearbox compatible with Horizon Hobby distributed Ultra Micro models (ParkZone, HobbyZone, and E-Flite)
    • OEM motor for ParkZone P-51, Sukhoi, and E-Flite T-28 Trojan
    • Ideal for aerobatic models weighing up to 1.3 oz and sport/scale models up to 2.5 oz
    • Suggested for many Stevens AeroModel ultra-micro model airplane kits
    • Compatible with EFL9051 propeller
     
     
    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3624
    15.99 USD
  • Ultra-Micro 3 Channel Receiver/ESC/Servo Combo [Replaces UA1151/PKZ3351]

    This OEM ParkZone PKZ3352/U1152 Ultra Micro Receiver/ESC/Servo "puck" is a factory replacement unit for the ParkZone Vapor, Ember 2, HobbyZone Champ and many other Ultra-Micro model aircraft distributed by Horizon Hobby.  The PKZ3352 is compatible with all ParkZone, E-Flite, HobbyZone, and Spektrum DSM2 compatible 2.4ghz transmitters.  This product will not fuction with Airtronics, Futaba, Hitec, or other non DSM2 compatible transmitter.

    The PKZ3352 weighs 3.3g and features an on-board receiver, electronic speed control (ESC), and servos mapped to Elevator (pitch) and Aileron (roll) transmitter channels. This configuration is Ideal for control of Rudder/Elevator three channel models. Two linear drive servos built atop a receiver/esc "puck" featuring a pre-soldered battery connector and motor plug.

    • Weight: 3.3g
    • Input Voltage: 3.7V (1S Lipo)
    • Compatible with PKZ3624 motor/gearbox

     

    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3352/U1152
    59.99 USD
  • Hyperion - CX G5 0160mAh 3.7V Ultra Micro LiPo 50C Max

    Hyperion G5 1S 3.7V (4.2V-Max) LiPo w/Ultra Micro Connector. We've had great results with this Hyperion Ultra Micro battery pack – compatible with all E-Flite, ParkZone, Spektrum, and HobbyZone ultra micro models requiring a 1S 3.7V battery. This is our go-to battery pack for the majority of our Stevens AeroModel micro aircraft.
    HP-G550-0160S1UM
    9.99 USD
  • ZAP - CA Glue, 1/4 oz. [PAAPT10]

    ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.

    SUPERIOR PENETRATING FORMULA
    SUPER THIN - WATER LIKE CONSISTENCY
    BONDS AND CURES IN 1 TO 5 SECONDS
    WORKS ON MOST MATERIALS
    PAAPT10
    3.99 USD
  • ZAP - Zap-A-Gap CA+ Glue, 1/4 oz. [PAAPT04]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT04
    3.99 USD
  • ZAP - Flexi Tips (24 / pkg.) [PAAPT21]

    Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
    PAAPT21
    4.99 USD
  • AeroLITE (SOLITE) Red, Bright - PatchPak [SOLITE-XR]

    AeroLITE (SOLITE) Bright Red, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XR
    7.99 USD
  • AeroLITE (SOLITE) Silver, Metallic - PatchPak [SOLITE-XS]

    AeroLITE (SOLITE) Metallic Silver, 11 in. x 27.5 in. (275mm x 700mm). Folded package.

    Ultra light iron-on self-adhesive film (polypropylene) for electric indoor and micro model aircraft. Now offered in convenient PatchPak size; just the right amount for repair jobs, trim, or covering our micro and ultra-micro model aircraft kits. Transparent colors weigh only 20 grammes per square meter (0.60 ounces per square yard). 'Solid' colors are only slightly heavier. Weights include color and adhesive.

    Film is folded into packages not rolled. Minor creases from packaging will readily iron out as film is applied to model.
    SOLITE-XS
    7.99 USD
  • Sanding Block Dual Grit 120/240

    This a great little item. Sanding block is made from very high density foam and features fine 240 and extrafine 120 grit papers. This block won't deform and cause waves in your project like those cheap hardware store sanding sponges.
    SA-TOOL/SB120240
    1.99 USD

Customer feedback

Average customer rating:
 
(1 reviews)  



1 Most recent customer reviews (see all reviews):
W. McNab
I am very happy with this kit. It is my first laser kit. I cannot get over how precise the fit on all the parts are. Thanks for a great model.

Send to Friend

Your name
Your email
Recipient's email
Add a personal message