StevensAero - 1918 Hergt Monoplane, Scale WWI Micro Kit

Product rating
 
(1 reviews)  

Catalog Number
SAK-HERGT2.4
Shipping Weight
0.30 lbs
Product Origin
Made in Colorado, U.S.A
Wing Span (in.)
14.5
Wing Area (sq. in.)
47
Length (in.)
12.5
Flying Weight (oz.)
1.2
Loading (oz. / sq. ft.)
3
Wing Cube Loading
5.4
Control Layout
RET
Buy Online
39.00 USD
Quantity

  • Product Description
  • Special Offers
  • Related Products
  • Customer Reviews
  • Send to Friend
The Hergt 1918 Monoplane, a delightfully obscure model airplane from “The Great War”, has been the subject of many a model aircraft scratch-builder. With docile handling and ease of construction, it’s no wonder why the Hergt is so favored by builders and pilots alike. Our Hergt, 1918 Monoplane kit is no exception, and has been engineered to readily accept ParkZone Ultra Micro DSM2 electronics, includes a full hardware complement, and bonus profile pilot figure. With Steven AeroModel’s quick build laser cut format your Hergt kit and you will likely be on dawn patrol the day after beginning construction!

Kit Includes:

Precision laser cut parts
Profile Pilot Figure
Full size plan set
Text instructions with downloadable photo supplement
Comprehensive hardware package including wheels and pushrods

Kit Requires:

1/2 oz. Thin and Medium CA glues
Sanding Block with 220 grit paper
AeroLITE covering film (Silver and Antique White)
AeroTRIM (Black)
ParkZone PKZ3351 or PKZUA1151 Receiver/ESC/Servo unit
ParkZone PKZ3624 Motor
130mm x 70mm Propeller EFL9051 or PKZ3601
DSM2 Compatible Spektrum, ParkZone, or E-Flite Radio

Last Update: 02/09/2011 Photo Supplement and Plans Updated

Special Offers

Special offers for this product are available!
This item: StevensAero - 1918 Hergt Monoplane, Scale WWI Micro Kit [1 item(s)]
List Price: 39.00 USD

Related Products

  • Ultra Micro Propeller 130mm x 70mm (2/pkg) [EFL9051/PKZ3601/HBZ4401]

    Ultra Micro Propeller (2/pkg) - 130mm x 70mm. This propeller was designed for the E-Flite 4-Site and is same propeller used by the UM P-51 by ParkZone. Also recommended for all micro models by Stevens AeroModel that utilize the PKZ3624 Motor and Gearbox. Package includes one 130mm x 70mm propeller with foam rubber spinner.

    (Note: propeller is installed by threading onto the output shaft of the pKZ3624 gearbox.)

    Part replaces EFL9051, PKZ3601, and HBZ4401

    SA-EFL9051
    4.99 USD
  • Ultra-Micro Motor and Gearbox [PKZ3624]

    High performance ParkZone PKZ3624 coreless brushed motor mounted in gearbox compatible with Horizon Hobby distributed Ultra Micro models (ParkZone, HobbyZone, and E-Flite)
    • OEM motor for ParkZone P-51, Sukhoi, and E-Flite T-28 Trojan
    • Ideal for aerobatic models weighing up to 1.3 oz and sport/scale models up to 2.5 oz
    • Suggested for many Stevens AeroModel ultra-micro model airplane kits
    • Compatible with EFL9051 propeller
     
     
    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3624
    15.99 USD
  • Ultra-Micro 3 Channel Receiver/ESC/Servo Combo [Replaces UA1151/PKZ3351]

    This OEM ParkZone PKZ3352/U1152 Ultra Micro Receiver/ESC/Servo "puck" is a factory replacement unit for the ParkZone Vapor, Ember 2, HobbyZone Champ and many other Ultra-Micro model aircraft distributed by Horizon Hobby.  The PKZ3352 is compatible with all ParkZone, E-Flite, HobbyZone, and Spektrum DSM2 compatible 2.4ghz transmitters.  This product will not fuction with Airtronics, Futaba, Hitec, or other non DSM2 compatible transmitter.

    The PKZ3352 weighs 3.3g and features an on-board receiver, electronic speed control (ESC), and servos mapped to Elevator (pitch) and Aileron (roll) transmitter channels. This configuration is Ideal for control of Rudder/Elevator three channel models. Two linear drive servos built atop a receiver/esc "puck" featuring a pre-soldered battery connector and motor plug.

    • Weight: 3.3g
    • Input Voltage: 3.7V (1S Lipo)
    • Compatible with PKZ3624 motor/gearbox

     

    Repair service and technical support for this product is handled by Horizon Hobby please click here to initiate a support request or contact Horizon Hobby technical support and repair service directly at: 888-959-2305 (M-F 8a-7 CST)

     

    PKZ3352/U1152
    59.99 USD
  • Hyperion - CX G3 0130mAh 3.7V 25/45C LiPo [HP-LG325-0130-1S-UM]

    These are a major upgrade for Eflite, ParkZone Ultra Micro and Kyosho Minium series micro RC models, and fit either without modification. With Hyperion's G3 technology inside, they deliver more mA per gram than the stock batteries, while sustaining higher voltage under high loads, for greatly improved power performance. Of course, like all Hyperion G3 Lipo they last for hundreds of cycles, with consistant performance, when properly charged and stored.

    The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.
    HP-LG325-0130-1S-UM
    6.99 USD
  • ZAP - CA Glue, 1/4 oz. [PAAPT10]

    ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts.

    SUPERIOR PENETRATING FORMULA
    SUPER THIN - WATER LIKE CONSISTENCY
    BONDS AND CURES IN 1 TO 5 SECONDS
    WORKS ON MOST MATERIALS
    PAAPT10
    3.99 USD
  • ZAP - Zap-A-Gap CA+ Glue, 1/4 oz. [PAAPT04]

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequaled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    PAAPT04
    3.99 USD
  • ZAP - Flexi Tips (24 / pkg.) [PAAPT21]

    Flexi-Tips by ZAP brand CA glues fine tip is suitable for thin and medium weight CA and allows for Smaller Drops, Precision Application, Extension into hard-to-reach areas, Maximum use of bottle. Universal! fits most brand's CA bottles.
    PAAPT21
    4.99 USD
  • Decal - Iron Crosses 2.5 and 1.75 in.

    CNC cut "Iron Crosses" are precision cut from premium 2 mil black vinyl and masked with low tack transfer tape. Includes two each 2.5 in. and 1.75 in. crosses. Ideal for our ultra-micro 1918 Hergt Monoplane model airplane kit. Made in Colorado, USA!
    DECAL-IC0250/IC0175
    7.99 USD
  • Replacement Parts by the Sheet for Stevens AeroModel Kits

    Ordering Instructions: 1) Prior to adding this item to your cart fill in the form below titled "Enter Kit and Sheet Number" with the model airplane kit and desired sheet number you wish to re-order. (Every Stevens AeroModel kit has the sheet number or sheet ID engraved on the cut sheet and/or listed in your product manual.) 2) Order one unit of this product per full laser cut sheet required. Thus, if you need to order multiple sheets or multiple copies of a single sheet, the order quantity of this item must match your requested sheet count. 3) Please be aware that this item is cut to order and will add 3-5 business days to the processing of your order.

    SAP-CUTSHEET
    6.00 USD

Customer feedback

Average customer rating:
 
(1 reviews)  



1 Most recent customer reviews (see all reviews):
Stanley E Wagner
Jun 7, 2015
I built the Hergt Monoplane and flew it yesterday. Had one problem with the left wing, it had a warp in it when I installed the struts. I was able to correct the warp and now it flys great.

Send to Friend

Your name
Your email
Recipient's email
Add a personal message