Free domestic shipping for orders over 150.00 USD

more details

PondFlyers™ RC Electric Airboats


Products

 

  • StevensAero - WaterBoard! Mini, Electric RC Airboat Kit

    The WaterBoard Mini, Pond Flyer™ RC Airboat.  There's a great deal of fun and value wrapped up in this mini radio control airboat.  Derived from our highly successful WaterBoard and redesigned at a reduced size for smaller ponds, puddles, pools, and indoor venues. Ideally suited for model airplane and boat enthusiasts alike!

    Simply put you will not find a more entertaining, easy building, and thoughtfully designed power boat on the market. Quick building, durable balsa and plywood construction, matched to a solid power system equals lasting thrills at the local watering hole. Round up your posse and go Waterboarding today!

    Our new R1.16 update (released 11.06.2014) now features our Nylon hatch Lock and Water Rudder upgrades as standard.  A 17.00 value!

    Product features:

    • Bonus upgrade! Kit now includes free upgrade to our easy twist-release battery hatch with nylon latch assembly!
    • Chamfered hull allowing this mini-sized boat to tackle larger chop, snow, and grass.
    • Bonus upgrade!  Kit now includes our flip-up water rudder to enhance control for the youngsters while still allowing excellent drift through corners.

    Product Includes:

    • 9 sheets of Laser Engineered Precision Cut Balsa and Hardwood components.
    • Twist-release battery hatch
    • Control Horns
    • Control Linkage
    • Neoprene Gaskets
    • Photo-illustrated assembly manual

    Electronics Required:

    • Radio with at least 2 Channel Control (We suggest an aircraft stick style radio)
    • Micro Receiver
    • 1 HS-35 or HS-55 Servo
    • SA Sport BL 250 2200KV (1510-15) Brushless Outrunner
    • 10A Brushless ESC
    • GWS 4.5 x 3 Propeller
    • 7.4V 500mAh LiPo

    Suggested Building Supplies:

    • Hobby Knife with #11 Blades
    • Sanding Block Sanding Bar
    • 220, 400, and 800 Grit Sand Paper
    • Balsa Filler
    • 5 and 30 Min. Epoxy
    • Medium and Thick CA glue
    • For a quick, easy, and lasting finish*: Deft Brand - Clear Wood Finish Lacquer Spray Paint - (Design Master Color Tool sprays)

    *Alternatively, you may seal the model with nitrate dope, lacquer, or epoxy.

    SAK-WBMINI
    59.00 USD
     
  • StevensAero - WaterBoard!, Electric RC Airboat Kit

    The WaterBoard a Pond Flyers™ RC Airboat is well suited for model airplane and boat enthusiasts alike! Simply put you will not find a more entertaining, easy building, and thoughtfully designed power boat on the market. Our clean, reliable, and quiet electric power system shames the fuel power boats in both speed and operability. Quick building, durable balsa and plywood construction, matched to a solid power system equals lasting thrills at the local watering hole. Round up your posse and go Waterboarding today!

    Click Here to Follow Build Thread on RCGroups
    Click Here for the RCPowerMag Review

    Product Includes:
    Laser Engineered Precision Cut Balsa and Hardwood components.
    Hardware, including Control Horns, and Control Linkage
    Laser Cut Neoprene Gaskets
    Photo-illustrated assembly manual.

    Electronics Required:
    Radio with at least 2 Channel Control (Spektrum DX-5)
    Micro Receiver (Spektrum AR500)
    1 HS-55* Servo or HS-82MG
    SA Sport 400 2200KV (2216-6) Brushless Outrunner
    30A Brushless ESC
    GWS 7x3.5x3 Propeller**
    7.4V 2100mAh LiPo

    Suggested Building Supplies:
    Hobby Knife with #11 Blades
    Sanding Block
    Sanding Bar
    220, 400, and 800 Grit Sand Paper
    Balsa Filler
    5 and 30 Min. Epoxy
    Medium and Thick CA glue

    For a quick, easy, and lasting finish***:
    Deft Brand - Clear Wood Finish
    Lacquer Spray Paint - (Design Master Color Tool sprays)

    *When using HS-55 (non metal gear) servos we suggest installing a Dubro servo saver (DUB120)
    **This propeller is not suitable for use with an 11.1V battery and 2200KV SA Sport motor.
    ***Alternatively, you may seal the model with nitrate dope, lacquer, or acrylic and cover with Lightex (AeroKote Lite)



    SAK-WBOARD
    89.00 USD